Cabinet Disassembly Instructions - Philips BDP3306/F7 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to items to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] Top Cover
[6] Power Supply CBA
[7] SD CBA
[8] Rear Panel
[9] BD Mechanism
Assembly
[10] BD Main CBA Unit
2. Disassembly Method
ID/
Fig.
Loc. Part
No.
No.
[1] Top Cover D1 5(S-1)
Tray Panel
[2] D2 ----------
Assembly
[3] Front Unit D2
[4] Front CBA D3 3(L-3)
Front
[5] D3 ----------
Assembly
Power
[6] Supply D4
CBA
[7] SD CBA D4
[8] Rear Panel D5 (S-4), (S-5), (S-6)
BD
[9] Mechanism D5
Assembly
BD Main
[10] D5 2(S-8)
CBA Unit
↓ ↓ ↓
(1) (2) (3)
[2] Tray Panel Assembly
[3] Front Unit
[4] Front CBA
[5] Front Assembly
Removal
Note
---
3(L-1), 3(L-2),
CN6803
---
3(S-2), CN1000,
CN1001, ---
Power Holder
2(S-3), CN6401,
---
CN6405
4(S-7), CN101,
CN301, CN302
↓
(4) (5)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to "Reference Notes."
Reference Notes
1. How to remove Tray Panel Assembly
1) Press the [A] button to open the tray.
2) Remove the Tray Panel Assembly.
3) Press the [A] button to close the tray.
2. CAUTION 1: Locking Tabs (L-1), (L-2) and (L-3)
are fragile. Be careful not to break them.
3. When reassembling, be sure to use the original
screws or specified screws listed in the parts
list.
4. When replacing the BD Mechanism Assembly
1
or BD Main CBA Unit, refer to "ADJUSTMENT
INSTRUCTIONS FOR BD MAIN CBA OR
2
BD MECHANISM ASSEMBLY REPLACEMENT."
2
(S-1)
3
4
[1] Top Cover
4
↓
1-5-1
(S-1)
(S-1)
Fig. D1
E5W21DC