Table of Contents
Advertisement
User documentation MAGICFX® CO2 Dominator
3.
4.
5.
Page 13
Connect a 3-pin DMX cable to the CO2
Dominator.
You can connect several CO2
Dominators to each other by using 3-pin
DMX cables.
Connect the other end of the DMX cable
(male plug) to a professional DMX
controller.
Always make sure that the controller is
placed in such a way that the operator has a
clear view of all the connected CO2
Dominators.
Consult the manual of your DMX controller
for instructions and the safe use of it.
Now connect the CO2 high pressure
hoses of 2 metres length to the CO2
cylinders.
Turn the couplings firmly by hand.
Turning it by hand will suffice! You should
only use a wrench if the coupling continues
to leak.
Place the CO2 cylinders (liquid carbon
dioxide with dip pipe) on an even and
solid surface. Place the cylinders in such
a position so that the opening of the
valve does not point in the direction of
people or objects. Preferably place the
CO2 cylinders outdoors or in a space
provided with good ventilation and a CO2
detection system. CO2 cylinders are
pressure containers. Therefore secure
them with special gas bottle brackets or
a chain to prevent them from toppling
over.
Advertisement
Table of Contents
