Table of Contents
Advertisement
Procedure for audio CDs
1. The "CD" source must be in stop mode.
2. Press the PRG button to select the program mode.
3. The display will then show
second shows the current memory location.
4. Use the ⏩ or ⏪ button to choose the title you want to save in the current memory location.
5. Press the PRG button to confirm the selection.
6. This displays the next storage location. Repeat steps 4 and 5 until your selection is complete or the number of
memory slots is full. If this happens, "Full" will appear in the display.
7. Press the
button to play back the programmed tracks. During playback, the track number and that of
the program position are displayed alternately.
8. Pressing the
Procedure for audio files
1. The "USB" source must be in stop mode.
2. Press the PRG button to select the program mode.
3. The display will then show
second shows the current memory location.
4. Choose a folder with the Fold+ or Fold- button, or keep the current folder. When selecting a folder, the
display changes to
"FXX XXX
5. Use the ⏩ or ⏪ button to choose the title you want to save to the current memory location.
6. Press PRG to confirm the selection.
7. This displays the next storage location. Repeat steps 4 and 6 until your selection is complete or the number of
memory slots is full. If this happens, "Full" will appear in the display.
8. Use
the
9. Pressing the key twice clears the programming.
•
Pressing the
existing program.
"01 PR01"
with
key twice clears the programming.
"01 PR01"
with
, where
"FXX"
button to start playing back the programmed title.
button during programming aborts the process. Switching off the device deletes an
"01"
flashing. The first number set shows the current title, the
"01"
flashing. The first number set shows the current title, the
stands for the current folder and
for the current title.
"XXX"
11
Advertisement
Table of Contents
