Disney DVD2100-C User Manual page 13

Connect to a Stereo Amplifier with Audio Output
You can enjoy high quality audio by connecting the audio output to your amplifier.
Connect the AUDIO OUT jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier.
DVD/VCR
Connect to an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems such as Dolby
Digital using the Coaxial Digital Output.
Use this connection to connect an:
• AV amplifier with built-in *Dolby Digital decoder
DVD/VCR
Coaxial digital cable (not supplied)
NOTES:
• The DVD OUTPUT jacks (COAXIAL, AUDIO L/R and S-VIDEO) are useful only for DVD section.
•
The VHS signal is output only from the composite jacks (DVD/VCR OUTPUT) and UHF/VHF OUT.
•
When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL "ON" on the AV Amplifier. If you do, a
loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged.
Audio (L) Output
Audio (R) Output
AUDIO cable (not supplied)
Video cable (not supplied)
Video Output
Coaxial Digital Audio Output
Stereo Amplifier
NOTE:
AV Amplifier with
You may connect to a TV with an S-Video
built-in various
cable (not supplied) instead of a video
decoder as above
cable (not supplied).
To Audio (L) Input
To Audio (R) Input
To Video
Input
TV
13