General Maintenance - Terratek TDP13 User Manual

WARNING: For your own safety, make sure switch is OFF and unplugged from the
power source before doing any maintenance or adjustments. Replace the power cord
immediately if it is cut, worn, or damaged in any way.
WARNING: The use of any other accessories is not recommended because it may
result in serious injury.
Never touch the drill bit while spindle is turning.
Select proper spindle speed and bit for job.
Always remember to remove chuck key before starting.
DANGER: Do not use any drill larger than the stated capacity of the drill press.
Maintenance
WARNING: For your own safety, make sure switch is off and unplugged from the
power source before doing any maintenance or adjustments. Replace the power cord
immediately if it is cut, worn, or damaged in any way.
CLEANING: Regularly clean the work surface with dry brush or clean a cloth. Keep
machined parts of the drill press lightly greased. Always keep the motor and drill chuck
clean.
Prevent metal, wood, dust or other debris from accumulating in this area. If jaws do not
operate smoothly, have the chuck serviced by a qualified technician.
LUBRICATION: For average use, lubricate twice a year with a 20-30 weight household
oil. Lubricate more frequently with increased usage.
POWERCORD: Inspect the power cord periodically and, if damaged, have it repaired
by an authorized technician.
REPLACEMENT PARTS: Replace belts at the first sign of slippage or fraying. When
servicing, use only identical replacement parts. Use of any other parts will void the
warranty.
STORAGE: Always remove and store drill bits
Accessories
CAUTION: Use only accessories or attachments recommended for use with your
Terratek tool specified in this manual. The use of any other accessories or attachments
might present a risk of injury to persons. Only use accessory or attachment for its
stated purpose.

General Maintenance

1. Keep the air vents free from obstruction and clean regularly
2. Check regularly for any dust particles entering the grills around the motor and the
trigger switch. Use a soft brush to remove any dust particles. Wear safety glasses
to protect your eyes whilst cleaning.
3. Monitor the dust bag (IF EQUIPPED) and empty when approximately half full.
Always empty into an appropriate container. REMEMBER: dust can be hot and
cause fire.
4. If the Blade has become dull, replace it. Dull blades will cause increased tear-out
14