Functional Description - Terratek TDP13 User Manual

Note: Outdoor extension cords used in must carry the letters "W-A" (USA) or "W"
(Canada)
Check all extension cords for damage before use.
Avoid sharp objects.
Do not position the cord where it could be subject to traffic passing over it.
Symbols
IMPORTANT: Some of the following symbols may be used on your tool.
V..............................volts
A..............................amperes
Hz.............................hertz
~...............................alternating current
.../m...........................revolutions per minute
..................................class II construction (double insulated)
Kg.............................kilograms
n ..............................No load speed
0
DC .......................Direct Current
Unpacking
Carefully remove the product and any accessories from the box. Make sure that all
items listed in the packing list are included.
Package contents
A) Drill press
B) Base
C) Column
D) Table
E) Handles
F) User manual

Functional Description

WARNING:Disconnect the plug from the power source before making any assembly,
adjustments or changing accessories. Such preventive safety measures reduce the
risk of starting the tool accidentally.
Assembly
Installing column to base
1. Bolt the column assembly to the base with the three hex screws provided. (Fig.1)
NOTE: Ideally, the base with column attached, should be firmly bolted to a
workbench, prior to the assembly of other components.
..........Conforms to relevant safety standards
10