Pioneer DEH-4000UB/XS/EW5 Service Manual page 28

1
• How to issue the 1 - 6 keys in the 08 model's slave test:
A
The specification of the 08 model does not include the 1 - 6 keys issuance function for H/U and the remote control unit. Therefore, in order to issue
commands in a slave test, use the direct FUNCTION keys alternatively to enable the equal key command sending function to the existing models.
Outline) Use the direct FUNCTION keys to display, select, or issue the KEY 1 - 6.
<Direct FUNCTION keys and corresponding functions>
Direct FUNCTION key
A
B
C
• For convenience, a name of each direct FUNCTION key is shown as "A", "B", and "C".
B
• How to issue the 1 - 6 keys for the CDS source:
(The areas below are overwritten and displayed on character strings for the normal mode display.)
1 During the slave test mode, the key name "K1" is shown at the left by default.
In this condition, press the A key to toggle K1 - K6, and select a command to be sent to the slave.
C O M
K 1
F
C
C O M
K 6
2 During the K1 - K6 key names are displayed, press the B key and issue the selected command.
C O M
K 1
D
3 Press the C key to change display/non-display of key names.
When the non-display mode is selected for the K1 - K6 key names, "A key" and "B key" are invalid.
C O M
K 1
C O M
F - !
E
F
28
1
2
Normal mode
ASR/SAT/FUNC1
RDM/SHFL/FUNC2
LOCAL/RPT/FUNC3
P A C T D I S C
! T - ! !
O L D E R T R K
A key
P A C T D I S C
! T - ! !
P A C T D I S C
! T - ! !
P A C T D I S C
! T - ! !
C key
P A C T D I S C
! T - ! !
DEH-4000UB/XS/EW5
2
3
Slave test mode
Selecting a key command
Issuing a key command
Switching a screen
• The one-line model shows only the bottom column.
! ! ! !
M N I U T E S E C O N D
! ! ! !
Send a key command selected by
pressing the KEY 1.
! ! ! !
B key
! ! ! !
• Pressing the A key or B key does not work.
! ! ! !
3
4
4