Mounting The Tv To The Wall; Completing The On Screen Setup; Choose The Menu Language - RCA L1510 User Manual

Connections & Setup

Mounting the TV to the Wall

Your LCD TV can be mounted to the wall using a compatible VESA standard wall mount, which
can be purchased at most electronic stores. To mount the LCD TV you must fi rst remove the
stand.
Wall mount
holes
Cover
1. Remove the cover at the bottom of the back panel by pushing down on both tabs.
2. Remove the four screws as shown above, being sure that you or someone helping you
holds the TV screen.
3. Attach the wall mount to the four holes on the back middle part of the TV.
4. Follow the directions that are packed with your wall mount.

Completing the On Screen Setup

There are several options you might need to set up in order for your TV to work properly. The
fi rst time you turn on your TV, the SETUP screen appears with Language highlighted. Follow
the instructions below to complete the setup for your TV.
SETUP
NAVIGATE ▼ ▲
SELECT
Language
Ch. Setup
Par. Control
Closed Caption
Time
10
Wall mount
holes
MAIN MENU
MENU
English...
...
...
...
_ _ : _ _ _ _ _ _ am
Graphics contained within this publication are for representation only.

Choose the Menu Language

Select your preferred language for the menu system.
1. The default language is English. To select French or Spanish, press
the right arrow button.
2. Press the down arrow button on the remote to highlight Ch. Setup.
Remove these screws
Chapter 1