Complete Channel Search - RCA L1510 User Manual

CH.SETUP
NAVIGATE ▼ ▲
ON/OFF
Auto Search Signal Type
List
Search
CH.SETUP
NAVIGATE ▼ ▲
ON/OFF
Auto Search Signal Type
List
Search
Chapter 1
SETUP MENU MENU
Cable...
OK
SETUP MENU
MENU
Cable...
OK
Graphics contained within this publication are for representation only.
Connections & Setup
Choose the Signal Type
In order for your TV to search for channels, you need to make sure
your signal source is set correctly.
1. With Ch. Setup highlighted, press the right arrow button to display
the CH. SETUP menu.
2. By default, the signal type is set to Cable. Press the right arrow
button to highlight Signal Type. Leave the signal type set to Cable
if your TV is receiving its signal from cable. If your TV is receiving
its signal from an off-air antenna, press the right arrow button
again to change the option to Antenna.
3. Press the down arrow button to highlight Search.

Complete Channel Search

To search for all channels viewable through your antenna or cable TV
system:
1. With Search highlighted, press the OK button.
Note: Depending on the number of channels you receive, it may
take several minutes for the channel search to fi nish.
2. When the search is complete, you might want to change your
channel list. Go to Chapter 3 for instructions. If you don't want
to change your channel list, the initial setup is complete and you
can press CLEAR to exit. The other setup options are explained in
Chapter 3.
11