Using ESC/VP21 Commands
You can control the projector from an external device using ESC/VP21.
g g Related Links
• "ESC/VP21 Command List"
p.113
• "Cable Layouts"
p.114
ESC/VP21 Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has turned
on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and returns a
":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
The following commands are available.
Item
Power On/Off
On
Off
Item
Signal selection
Command
PWR ON
PWR OFF
A/V Mute On/Off
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Contact Epson for more details.
Computer1
Auto
RGB
Component
Computer2
Auto
RGB
Component
HDMI1
(EB‑2247U/EB‑2142W/EB‑2042/EB‑99
0U/EB‑980W/EB‑970/EB‑109W/EB‑10
8/EB‑107/EB‑W39)
HDMI (EB‑X39/EB‑S39)
HDMI2/MHL
(EB‑2247U/EB‑2142W/EB‑2042/EB‑99
0U/EB‑980W/EB‑970/EB‑109W/EB‑10
8/EB‑107)
HDMI2 (EB‑W39)
Video
USB Display
USB
LAN
Screen Mirroring (EB-2247U/EB-
2142W)
On
Off
113
Command
SOURCE 1F
SOURCE 11
SOURCE 14
SOURCE 2F
SOURCE 21
SOURCE 24
SOURCE 30
SOURCE A0
SOURCE 41
SOURCE 51
SOURCE 52
SOURCE 53
SOURCE 56
MUTE ON
MUTE OFF