Table of Contents
Advertisement
At [Users of This Computer], select [Users must enter a user name and password
10
to use this computer], then select [Next].
Select [Finish].
11
Enter your administrator password and select [OK].
12
8
<Only for models with touchscreen>
Calibrate the touchscreen.
Windows XP
Select [Start] - [Control Panel] - [Other Control Panel Options] - [Touch Panel] -
1
[Calibration] - [Execute].
Touch the "+" mark on the calibration screen with the stylus (included) for about
2
one second.
The calibration procedure ends when the nine "+" marks are touched.
Select [OK].
3
Windows 2000
Select [Start] - [Settings] - [Control Panel] - [Touch Panel] - [Calibration] - [Execute].
1
Touch the "+" mark on the calibration screen with the stylus (included) for about
2
one second.
The calibration procedure ends when the nine "+" marks are touched.
Select [OK].
3
9
Windows XP
Create a new account.
Select [Start] - [Control Panel] - [User Accounts] - [Create a new account].
1
Enter a name for the new account, then select [Next].
2
Select [Computer administrator], then select [Create Account].
3
<When you want to create a password for the new account>
4
Select the new account you have created and select [Create a password].
Follow the instructions on the screen to create a password.
Select [Start] - [Turn Off Computer] - [Restart] to restart the computer.
5
CAUTION
Remember this password! If the password is forgotten, Windows cannot be
operated. You can create a password reset disk beforehand (
NOTE
When creating a new user account:
• If you make mail settings, create password reset disks (
conduct other related operations before creating the user account, you will
be unable to use any previous mail history or settings.
• When you create the first new account, you can only select [Computer
administrator].
Once a "Computer Administrator" account has been created, you can cre-
ate additional limited user accounts.
Note also that only the added user account will be displayed in the Wel-
come screen. The account for the administrator created during Windows
setup will not be displayed.
If you use the wireless LAN, be sure to refer to the Reference Manual's
"Wireless LAN".
This concludes the first-time use operation guidelines.
page 14).
page 14), or
13
Advertisement
Table of Contents
