Changing Between Directv And Tv Mode - RCA F38310 User Manual

BASIC TV OPERATION
Changing Between DIRECTV and TV
Mode
When you change channels by entering numbers with the remote
control, you tune to programming that can come from one of three
different sources: the DIRECTV satellite (if you have DIRECTV service), a
terrestrial off-air antenna, or cable TV. You tune to one of these sources
by pressing either TV or DIRECTV on the remote control; then you can
enter the channel numbers. The diagrams below show how your remote
control communicates with the three sources.
In DIRECTV mode, you tune to channels
that come from the DIRECTV satellite signal
(if you subscribe to DIRECTV
Enter channel numbers that are one to four
digits long. Then press OK to tune.
In TV mode, you tune to channels that
carry the terrestrial off-air or cable TV
signal.
• To tune to an analog channel, enter
channel numbers that are up to three
digits long. Press OK to tune.
• To tune to a digital channel, enter
channel numbers that are one, two, or
three digits long. If necessary, press the
right arrow and enter a subchannel
number. These subchannel numbers
appear in the box to the right of the
primary channel number. Press OK to
tune.
2 6
VCR1
DVD
® programming).
MUTE
FETCH
GUIDE
MENU
VCR1
DVD
MUTE
FETCH
GUIDE
MENU
ON•OFF
TV
VCR2 AUX DIRECTV
SKIP
+
CH
CH
GO BACK
INFO
OK
CLEAR
ON•OFF
TV
VCR2 AUX DIRECTV
SKIP
+
CH
CH
GO BACK
INFO
OK
Right arrow
button
CLEAR
Subchannel (if
Primary
necessary)
Channel