Safety Rules - Gravely 915034 - ZT1640 Owner's/Operator's Manual

Zt series
Hide thumbs Also See for 915034 - ZT1640:
Table of Contents

Advertisement

Go up and down slopes, not
across.
10
MAX
OL1807
• If machine stops going uphill, stop
blade and back down slowly.
• Avoid sudden turns.
• Keep safety devices (guards, shields,
switches, etc.) in place and working.
• Check interlock system per manual
before use.
• Understand location and function of all
controls.
• Never allow operation by untrained
persons.
• Disengage PTO, stop unit and engine,
set parking brake and remove key
before making any inspections, repairs,
etc.
6. Hot Surfaces!
DO NOT touch parts which are
hot from operation. ALWAYS
allow parts to cool.
OL1801

SAFETY RULES

If unit is to be used by someone other than
original purchaser; loaned, rented or sold,
ALWAYS provide this manual and any needed
safety training before operation.
Read, understand, and follow all safety
practices in Owner/Operator Manual before
assembling, using or working on this mower.
ALWAYS remove key from ignition and wire
from spark plug before assembly, or working
on this unit.
Inspect unit before each use for: missing or
damaged decals and shields, correctly
operating safety interlock system, and
deterioration of grass catchers. Replace or
repair as needed.
ALWAYS check overhead and side clearances
carefully before operation. ALWAYS be aware
of traffic when crossing or operating along
streets or curbs.
Keep children, people, and pets away. Be alert
and shut off unit if anyone enters work area.
Keep children under watchful care of a
responsible adult.
NEVER allow children to operate or play on or
near unit.
Keep area of operation clear of all toys, and
debris. Thrown objects can cause injury.
Stay alert for hidden hazards, holes, and ruts.
Avoid uneven or rough terrain. DO NOT
operate near drop offs, ditches, or
embankments. Unit can suddenly turn over if a
wheel is over the edge of a cliff or ditch, or if
an edge caves in.
Dust, fog, etc. can reduce vision and cause an
accident. Operate unit only when there is good
visibility and light.
Data indicates that operators, age 60 and
above, are involved in a larger percentage of
riding mower related injuries. These operators
should evaluate their ability to operate the
riding mower safely enough to protect
themselves and others from serious injury.
Only trained adults may operate unit. Training
includes being familiar with controls and actual
operation.
NEVER operate unit after or during the use of
medication, drugs or alcohol.
NEVER allow anyone to operate this unit when
their alertness or coordination is impaired.
Wear adequate safety gear, sturdy shoes, and
protective gloves.
DO NOT wear loose clothing or jewelry and tie
back hair that may get caught in rotating parts.
Protect eyes, face and head from objects that
may be thrown from unit. Wear appropriate
hearing protection. Always wear safety
goggles or safety glasses with side shields
when operating mower.
Avoid sharp edges. Sharp edges can cut.
Moving parts can cut off fingers or a hand.
ALWAYS keep hands and feet away from all
rotating parts during operation. Rotating parts
can cut off body parts.
ALWAYS keep hands away from all pinch
points.
DO NOT touch unit parts which might be hot
from operation. Allow parts to cool before
attempting to maintain, adjust or service.
NEVER place your hands or any part of your
body or clothing inside or near any moving
part while unit is running.
NEVER direct discharge towards persons or
property. Thrown objects may ricochet back
towards operator.ALWAYS stand clear of the
discharge area.
ALWAYS disengage attachment, stop unit and
engine, remove key, engage parking brake,
and allow moving parts to stop before leaving
operator's position.
Use extreme caution on gravel surfaces.
Disengage PTO when attachment is not in use
and when crossing gravel surfaces.
DO NOT operate unit if safety interlock system
is damaged or disabled. Check safety interlock
before each use.
GB - 5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

915036 - zt1844915038 - zt2048915040 - zt2252

Table of Contents