Gravely ZT 1334 Owner's/Operator's Manual
  1. Manuals
  2. Brands
  3. Gravely Manuals
  4. Lawn Mower
  5. ZT 1334
  6. Owner's/operator's manual

Gravely ZT 1334 Owner's/Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
™
ZT
Owner/Operator Manual
Manuel Du Propriétaire/Utilisateur
ENGLISH
FRANÇAIS
Models
915130 – 1334
03824400A 2/09
Printed in USA

Advertisement

Table of Contents
loading

Related Manuals for Gravely ZT 1334

Summary of Contents for Gravely ZT 1334

  • Page 1 ™ Owner/Operator Manual Manuel Du Propriétaire/Utilisateur Models 915130 – 1334 ENGLISH 03824400A 2/09 FRANÇAIS Printed in USA...

  • Page 2: Table Of Contents

    English are also available as a position and facing the direction of forward free download on our website: travel. http://www.gravely.com MODEL AND SERIAL NUMBERS When ordering replacement parts or making MANUALES EN IDIOMAS service inquiries, know the Model and Serial DIFERENTES DEL INGLES numbers of your unit and engine.
  • Page 3 1. Make sure all assembly has been PRODUCT REGISTRATION properly completed. 2. Understand all Safety Precautions The Gravely dealer must register the product provided in the manuals. at the time of purchase. Registering the 3. Review control functions and operation product will help the company process of the unit.

  • Page 4: Safety

    SAFETY CAUTION: POTENTIALLY WARNING: This cutting machine HAZARDOUS SITUATION! If not is capable of amputating hands avoided, MAY RESULT in minor and feet and throwing objects. or moderate injury. It may also be Failure to observe the safety used to alert against unsafe instructions in the manuals and on practices.
  • Page 5 Figure 2 1.DANGER! 3.DANGER! Always keep feet and hands Avoid injury - Stay clear of away from rotating parts. rotating parts. OL1816 OL1809 2.CAUTION Always stand clear of discharge area. Do not direct discharge toward other people. OL1810 No smoking. Keep people away from unit while operating.
  • Page 6 4.DANGER! TO AVOID SERIOUS 5.WARNING! INJURY OR DEATH Read the operator’s manual. Always stand clear of discharge area. OL1814 OL1801 Keep children and others away Do not operate mower unless from unit while operating. bagger is attached or guards are in operating position. OL1802 OL1815 Never direct discharge toward...
  • Page 7 ALWAYS remove key from ignition and wire ALWAYS keep hands and feet away from all from spark plug before assembly, or working rotating parts during operation. Rotating parts on this unit. can cut off body parts. Inspect unit before each use for: missing or ALWAYS keep hands away from all pinch damaged decals and shields, correctly points.
  • Page 8 Follow the manufacturer’s recommendations DO NOT transport machine while engine is for wheel weights or counterweights to running. improve stability when using attachments. ALWAYS turn off power to attachment and NEVER carry passengers–especially shut off fuel when transporting unit. children–even with blades off. Keep unit free of grass clippings, leaves, and Use extra care when approaching blind other debris.
  • Page 9 DO NOT TIP battery beyond a 45° angle in Shut off fuel (if provided) and allow engine to any direction. cool completely before storing in closed area or covering unit. ALWAYS keep batteries out of reach of children. Clean grass and debris from unit, especially from around muffler and engine, to help Battery posts, terminals and related prevent fires.

  • Page 10: Assembly

    ASSEMBLY WARNING: AVOID INJURY. Read and understand the entire Safety section before proceeding. Tools Required • Adjustable wrench • Petroleum jelly or dielectric grease. Unpack Unit Remove unit and all other components from the shipping container. Engage transmission bypass lever (see MOVING UNIT MANUALLY on page 15).
  • Page 11 Check Tire Pressure Level Mower Deck See LEVELLING AND ADJUSTING PITCH CAUTION: Avoid injury! OF MOWER DECK on page 20. Explosive separation of tire and Fill Fuel Tank rim parts is possible when they are serviced incorrectly: See FILLING FUEL TANK on page 14. •...

  • Page 12: Controls And Features

    CONTROLS AND FEATURES Figure 4 1. Throttle/Choke Lever 6. Steering Levers 2. Ignition Switch 7. Fuel Tank 3. PTO Switch 8. Mower Lift Pedal 4. Seat 9. Mower Deck 5. Fuel Level 10. Discharge Chute 11. Parking Brake GB - 12...

  • Page 13: Operation

    See figure 4 for all controls and features properly. locations. Perform the following tests to ensure the safety interlock system is working properly. If the unit does not perform as stated contact your Gravely dealer for repairs. Test Steering Lever Parking Brake Engine Neutral Position...
  • Page 14 Steering Levers Mower Lift Pedal (Figure 5) • Reverse (1) – Pull both steering levers Raises and lowers mower deck. backward. Press mower lift pedal and install adjustment • Forward (2) – Push both steering pin in the desired adjustment hole. levers forward.
  • Page 15 IMPORTANT: DO NOT operate starter for Vary cutting pattern with each mowing. more than 10 seconds per minute as damage Do not allow grass or debris to collect inside can occur. of mower deck. Clean after each use. 2. Put the ignition key in the switch and turn it to the Start position.

  • Page 16: Maintenance Schedule

    Parking MOVING UNIT MANUALLY on page 15). Push unit. If unit rolls, contact Brake your Gravely Dealer. Clean Unit Clean engine, battery, seat, mower deck, etc. of all dirt and debris. Do not use solvents, hard cleaners, or abrasives. NOTE: Protect painted surfaces with automotive type wax.
  • Page 17 Interval Task Action Each Use Follow Perform scheduled engine maintenance. Refer to Engine Manual for Engine detailed instructions. Manual NOTE: To drain the oil, use the oil drain petcock (1) supplied with unit, Mainten- not the drain plug that is shown in the Engine Manual. ance Schedule 25 Hours...

  • Page 18: Service And Adjustments

    SERVICE AND ADJUSTMENTS MOWER DECK REMOVAL AND INSTALLATION WARNING: AVOID INJURY. Read and understand the entire Remove (Figure 9) Safety section before proceeding. 1. Remove PTO belt from the engine drive pulley (see REPLACING PTO BELT on page 24). TIPPING SEAT FORWARD 2.
  • Page 19 Install (Figure 9) 5. Install PTO belt on the engine drive pulley (see REPLACING PTO BELT on 1. Slide mower deck under unit. page 24). NOTE: Perform step 2 and 3 for the right and NOTE: Make sure the cable is taut, but not left side of unit.
  • Page 20 LEVELLING AND ADJUSTING The Forward Pitch Of The Mower Blades (Figure 11): PITCH OF MOWER DECK • Should be 0.0 in. (0.0 mm) to 1/4 in. NOTE: Adjust on a level surface, with the (6.35 mm) pitched forward. tires inflated to the correct air pressure (see SPECIFICATIONS on page 29).
  • Page 21 1. Remove mower blade from unit (see REPLACING MOWER BLADE on Figure 13 page 21). REPLACING MOWER BLADE Gravely recommends having mower blades sharpened by a professional. Contact your Remove (Figure 14) Gravely dealer. Discard mower blade if (figure 15): CAUTION: Mower blades are •...
  • Page 22 3. Check mower blade balance by sliding Battery Removal and Installation mower blade on an unthreaded bolt. If Remove (Figure 16) blade is balanced, it should remain in a horizontal position. If either end of 1. Tip seat forward (see TIPPING SEAT mower blade moves downward, sharpen FORWARD on page 18).
  • Page 23 5. Install battery on unit (see Battery Removal and Installation on page 22). Figure 17 Jump-Starting Gravely does not recommend jump-starting NOTE: Perform steps 1 and 2 for both your unit. Jump-starting can damage engine steering levers. and electrical system components. See your 1.
  • Page 24 Forward Speed Adjustment REPLACING PTO BELT (Figure 18) Remove (Figure 19) NOTE: Reverse speed cannot be adjusted. If 1. Lower mower deck to the ground. unit tracks excessively left or right in reverse, 2. Remove belt covers from mower deck. see your Dealer for repair.
  • Page 25 Install (Figure 19) NOTE: Do not install PTO belt on left mower deck pulley in step 1. 1. Install PTO belt on engine drive pulley and mower deck. 2. Pull idler arm towards outside of unit until PTO belt can be routed around left mower deck pulley.

  • Page 26: Storage

    5. Connect spark plug wire(s) or replace spark loose or spark plug(s). Refer to Engine Manual for detailed plug(s) faulty. instructions. 6. Faulty electrical 6. Contact your Gravely Dealer. system. 7. Faulty engine. 7. Contact your Gravely Dealer. Engine runs 1. Choke engaged.
  • Page 27 2. Faulty hydrostatic 2. Replace hydrostatic belt (see REPLACING steering levers. belt. HYDROSTATIC BELT on page 25). 3. Faulty 3. Contact your Gravely Dealer. transmission. PTO or mower 1. Operator 1. Depress operator presence switch by sitting presence switch on seat.

  • Page 28: Service Parts

    SERVICE PARTS ACCESSORIES Be sure to always use genuine Gravely See your authorized Gravely dealer to add parts to keep your unit running like new. these optional accessories to your unit. Part No. Description Part No. Description 51519500 Spindle Assembly...

  • Page 29: Specifications

    SPECIFICATIONS Model Number 915130 Model ZT 1334 Engine Type Briggs & Stratton IC 21 (344) Engine Displacement in. (cc) Governed RPM (May be 3600 + 0 different from maximum RPM) 3600 – 100 Speed Forward Max. – m.p.h (km/h) 6.0 (9.6) Reverse Max.

  • Page 30: Warranty

    Genuine Ariens or Gravely brand service parts and accessories are warranted to be free from defects in material and workmanship for a period of 90 days after the date of purchase. An authorized Ariens or Gravely dealer will repair or replace any such part or accessory free of charge, except for labor, during that period.
  • Page 31 Eye-Q™ and Scan-Mate™ units are covered by their own warranty and are not covered by this warranty. • Parts that are not genuine Ariens or Gravely service parts are not covered by this warranty. • The following maintenance, service and replacement items are not covered by this warranty unless...
  • Page 32 Ariens Company 655 West Ryan Street Brillion, WI 54110-1072 920-756-2141 Fax 920-756-2407 www.ariens.com...

This manual is also suitable for:

915130

Table of Contents