Warranty - Tripp Lite APSINT2424 Manual
2400w aps int series 24vdc 230v
inverter/charger with auto-transfer switching,
hardwired
Hide thumbs
Also See for APSINT2424:
- Owner's manual (23 pages) ,
- Owner's manual (37 pages) ,
- Datasheet (1 page)
Advertisement
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs
Switches
PHYSICAL
Shipping Dimensions (hwd / in.)
Shipping Dimensions (hwd / cm)
Shipping Weight (lbs.)
Shipping Weight (kg)
Unit Dimensions (hwd / in.)
Unit Dimensions (hwd / cm)
Unit Weight (lbs.)
Unit Weight (kg)
Cooling Method
Material of Construction
Form Factors Supported
ENVIRONMENTAL
Relative Humidity
LINE / BATTERY TRANSFER
Transfer Time (Line Power to
Battery Mode)
Low Voltage Transfer to Battery
Power
High Voltage Transfer to Battery
Power
SPECIAL FEATURES
Load Sensing
CERTIFICATIONS
Certifications
WARRANTY
Set of 6 LEDs offer continuous status information on load percentage (6 levels reported) and battery charge level (7
levels reported). See manual for sequences.
3 position on/off/remote switch enables simple on/off power control plus "auto/remote" setting that enables distant
on/off control of the inverter system when used in conjunction with optional <a class="productLink"
href="//www.tripplite.com/Remote-Control-Module-Tripp-Lite-PowerVerter-Inverters-Inverter-
Chargers~APSRM4">APSRM4</a> accessory when used in inverter mode. In AC uninterruptible power
mode, "auto/remote" setting enables automatic transfer from line power to battery power - to maintain continuous AC
power to connected loads.
12.700 x 14.700 x 20.900
32.26 x 37.34 x 53.09
45.6000
20.68
7.25 x 8.5 x 16.25
18.42 x 21.59 x 41.28
38.2
17.33
Multi-speed fan
Polycarbonate
Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional
mounting information)
0-95% non-condensing
20 milliseconds (typical - compatible with many computers, servers and networking equipment - verify transfer time
compatibility of loads for UPS applications)
In AC "auto" mode, inverter/charger switches to battery mode as line voltage drops to 144V (user adjustable to 163,
182, 201V - see manual)
In AC "auto" mode, inverter/charger switches to battery mode as line voltage increases to 259V (user adjustable to
264 - see manual)
Optional load sense function enables automatic inverter shutoff and startup as connected equipment is powered off
and on. Front panel load sense potentiometer can be set to shutoff or turn on inverter power in response to loads of
any level, up to 150 watts.
RoHS Compliant
4 / 5
Advertisement
