Specifications - Panasonic HG-C1030 Instruction Manual

14

Specifications

NPN output HG-C1030
HG-C1030-P
PNP output
Measurement center
distance
Measurement range
Repeatability
Linearity
Temperature
characteristic
Beam diameter
2
Light source
Supply voltage
Power consumption
NPN output type:
NPN open collector transistor
● Maximum sink current: 50mA
Control Output ● Applied voltage: max. 30V DC
(between control output to 0V)
● Residual voltage: max. 1.5V (at 50mA sink current)
● Leakage current: max. 0.1mA
Output operation
Short-circuit
protection
Analog voltage
output
Analog current
output
Response time Switchable between high speed (1.5ms), standard (5ms), and high precision (10ms)
NPN output type:
NPN non-contact input
Input conditions:
External input
Invalid: +8 to +V DC or open
Valid: 0 to +1.2V DC
Input impedance: ≈ 10kΩ
Degree of protection
Degree of pollution
Ambient temperature
Ambient humidity
Ambient illumination
Operating altitude
Cable
Material
Weight
Applicable standards
Measurement conditions: 24V supply voltage, 20°C ambient temperature,
1
10ms response time. The subject is white ceramics.
This is the size in the measurement center distance. These values were
2
defined by using 1/e (approx. 13.5%) of the center light intensity. Due to leak
2
light outside the specified area, the reflectance around the detecting point may
be higher than at the point and this may affect the measurement value.
HG-C1050
HG-C1050-P
30mm 50mm
±5mm ±15mm
10µm 30µm
±0,1% F.S.
≈ 50µ ≈ 70µ
m m
Red semiconductor laser class 2 (JIS / IEC / GB) / class II
Max. output: 1mW, emission peak wavelength: 655nm
12 to 24V DC ±10% including ripple max. 10% (P-P)
max. 40mA (at 24V DC supply voltage), max. 60mA (at 12V DC supply voltage)
-10 to +45°C (no dew condensation or icing allowed), storage: -20 to +60°C
3000ℓx max. (Illumination level of light receiving surface under incandescent light)
HG-C1100 HG-C1200
HG-C1100-P HG-C1200-P
100mm
±35mm
70µm
±0,2% F.S.
0.03%F.S./°C
≈ 120µ ≈ 300µm
m
PNP output type:
PNP open-collector transistor
● Maximum source current: 50mA
● Applied voltage: max. 30V DC
(between control output to 0V)
● Residual voltage: max. 1.5V (at 50mA source current)
● Leakage current: max. 0.1mA
Selectable either Light-ON or Dark-ON
Incorporated (auto-reset)
Voltage output: 0 to 5V (Alarm: +5.2V)
Output impedance: 100Ω
Current output: 4 to +5V (Alarm: 0mA)
Load impedance: max. 250Ω
PNP output type:
PNP non-contact input
Input conditions:
Invalid: 0 to +0.6V DC or open
Valid: +4 to +V DC
Input impedance: ≈ 10kΩ
IP67 (IEC)
2
35 to 85% RH, at storage: 35 to 85% RH
Max. 2000m
0.2mm 5-core composite cable, 2m long 2m
2
Enclosure: die-cast aluminum, front cover: acrylic
≈ 35g (without cable), ≈ 85g (including cable)
EMC Directive
Panasonic Industrial Devices SUNX Co., Ltd.
http://panasonic.net/id/pidsx/global
Overseas Sales Dept. (Head Office)
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Telefon: +81-(0)-568-33-7861 FAX: +81-568-33-8591
Europe Headquarter: Panasonic Electric Works Europe AG
Robert-Koch-Straße 100, D-85521 Otttobrunn, Germany
Telefon: +49-89-45354-1000
7 7
200mm
±80mm
● 300µm (measurement distance 200
to 400mm)
70µm
● 800µm (measurement distance 400
to 600mm)
● ±0,2% F.S. (measurement distance
200 to 400mm)
● ±0,3% F.S. (measurement distance
400 to 600mm)
HG-C1400
HG-C1400-P
400mm
±200mm
≈ 500µm