Table of Contents
Advertisement
PC Connection
This is an example of a connection using the PC VIDEO jack. Go
instructions.
ViewingPicture from Connected Device
1. Plug in the TV (see
page 16
2. Turn on the TV and the device you want to view, for example a DVD player.
3.
Repeatedly press the INPUT button on the remote control to select VID (if connected
to the VIDEO INPUT jacks), CMPT (if connected to the CMPT jacks) or HDMI (if
connected to the HDMI/DVI jack)
viewing TV channels, use the number buttons to enter the channel you want to view.
If the picture from the DVD player appears black and white and your device is connected to
Note:
the VIDEO INPUT, you might be tuned to the wrong input. Make sure you press INPUT until you
select
VID, CMPT or HDMI
displayed at the top of the TV's screen.
Note:
If you're done connecting devices to your TV, go to
•
To continue connecting devices, go to the next page.
•
Viewing PC
1. Plug in the TV and the PC, if they aren't already plugged in.
2. Turn on the TV and the PC.
3. Repeatedly press the INPUT button on the remote control until you select PC displayed at
the top of the TV's screen. To go back to viewing TV channels, use the number buttons to
enter the channel or press CH+ or CH- buttons.
If you're done connecting devices to your TV, go to page 21 to complete the Initial Setup.
Note:
for details) and the device, if they aren't already plugged in.
displayed at the top of the TV's screen. To go back to
page 17
page 14
for specific
to complete the Initial Setup.
Connections and Setup
Don't forget:
If necessary, connect
antenna or cable to get
a picture. Go to page
10
for instructions.
15
Chapter 1
Advertisement
Table of Contents
