Safety Instructions on the next page. Product Registration Please fill out the product registration card (packed separately) and return it immediately. For US customers: Your RCA Consumer Electronics product may also be registered at www.rca.com/television. Registering this product allows us to contact you if needed.
Important Safety Instructions Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8.
Table of Contents Important Safety Instructions ... i Chapter 1 I Connections & Setup Things to Consider Before You Connect ... 6 Protect Against Power Surges ... 6 Instructions at the Beginning of User's Guide ... 6 Position Cables Properly to Avoid Audio Interference ... 6 Use Indirect Light ...
Programming Remote to Operate Other Devices ... 22 Find Out If You Need to Program Remote ... 22 Programming Remote ... 23 How to Use the Remote After You’ve Programmed It ... 24 Modes of Operation ... 24 Manual Reset of Remote Control ... Remote Code List ...
Connections and Setup Things to Consider Before You Connect Protect Against Power Surges • Connect all devices before you plug any power cords into the wall outlet or power strip. NEVER plug your TV into an outlet that is controlled by a wall switch. •...
Attaching TV to Table Stand Your TV comes without the table stand attached so that you can choose to mount your TV either to its table stand or to a wall (wall mount sold separately). If you want to mount your TV to the wall, don’t attach the table stand, and instead, follow the Mounting Your TV to the Wall instructions on Table Stand Assembly for models L22HD31 Parts List...
Step 3 Attach the table stand to the TV cabinet by inserting the stand into the stand connector support, and aligning the three screw holes, from the bottom, tighten- ing three M4 St-screws with a screwdriver. Stand Connector Support 3 size M4 St-screws Mounting TV to Wall To mount your TV to the wall you need to purchase a VESA wall mount Model L22HD31...
Get the Picture The first part of connecting your TV is to get the picture, also known as the signal. The back panel of your TV allows you to receive analog and/or digital channels by using the ANTENNA/ CABLE INPUT. Getting Channels What You Need Antenna ("rabbit ears") or outdoor antenna with coaxial cable...
12-13 instruct you in its operation. For details about this service, call 1-888-206-3359 For additional pages 13-14 assistance while using your RCA product, please visit www.rca.com/ customersupport pages 14-15 Connections and Setup Chapter 1...
Connecting a Device with Composite Video (Good) This connection allows you to connect a device that has a Video Out jack, for example, a DVD player. Using the example of a DVD player: 1. If necessary, connect your cable and/or off-air antenna as described on 2.
Component Video Connection This is an example of a connection using the component video jacks. Go to specific instructions. COMPONENT VIDEO CABLES (Y Pb Pr) ARE COLOR CODED- GREEN, BLUE AND RED Connecting a Device with HDMI (Best) High-Definition Multimedia Interface (HDMI) technology is an uncompressed digital connec- tion that carries both video and audio data by way of an integrated mini-plug cable.
HDMI/DVI Connection (Best) This is an example of a connection using the HDMI2/DVI jack. Go to instructions. Don’t forget: If necessary, connect antenna or cable to get a picture. Go to page for instructions. HDMI Cable Connecting a PC Device This connection allows you to connect to a personal computer and use your TV as a monitor.
Page 15
PC Connection This is an example of a connection using the PC VIDEO jack. Go instructions. ViewingPicture from Connected Device 1. Plug in the TV (see page 16 for details) and the device, if they aren't already plugged in. 2. Turn on the TV and the device you want to view, for example a DVD player. Repeatedly press the INPUT button on the remote control to select VID (if connected to the VIDEO INPUT jacks), CMPT (if connected to the CMPT jacks) or HDMI (if connected to the HDMI/DVI jack)
Plug in TV Plug the end of the power cord into the back of the TV. Plug the other end into an outlet. Insert the plug completely into the outlet. Do not plug into an outlet controlled by a light switch. Put Batteries in Remote •...
Complete Initial Setup The menu system in your TV allows the TV’s features to work properly. The first time you turn on your TV, the language screen appears. Set Menu Language The first part of the setup allows you to select your preferred language for the menu system. English is your preferred language, press OK and go to set the TV Location Mode.
What To Expect Watching TV Remember: • channel. Analog video is sent in a 4/3 format, or your TV can display these channels in a16/9 format by pressing the FORMAT button to view the different formats available. Go to more explanation of screen formats. Remember: •...
Explanation of Jacks (in alphabetical order) This section describes the jacks on the back panel of your TV. There are several ways to connect devices. PC INPUT DVI AUDIO INPUT HDMI/DVI VIDEO AUDIO INPUT ANTENNA/CABLE INPUT Lets you connect a coaxial cable to receive the signal from your antenna, cable, or cable box.
Buttons and Other Jacks On Your TV Side Input Jacks Headphones Side Panel Buttons If you cannot locate your remote, you can use the side panel buttons of your TV to operate many of the TV’s features. (POWER) MENU/(OK) and selects highlighted items. remote control and adjusts menu controls.
Using the Remote Control Remote Control Buttons Alphanumeric Buttons Enter channel number; time setting; and options with letters, using these buttons. To enter a channel, press the number buttons and press OK (or just let the entry timeout). To enter a digital channel with a sub-channel, enter the main channel, then press the right arrow button to enter the sub-channel and press OK.
DVD players, cable boxes, satellite receivers and other devices. In addition to being programmed to operate your television, it’s already programmed to operate some RCA devices. Notes: The TV button can’t be programmed on this remote to control any device; it controls only this TV.
Programming Remote The CANCEL button is used as visual feedback during the programming operation. During programming, the CANCEL button will light up when buttons are pressed and turn off when buttons are released. When programming is finished, the CANCEL button will long blink to indicate success and short blink to indicate fail.
How to Use Remote After Programming It Once the remote has been programmed successfully, it is ready to operate your devices. To operate a device: 1. Press the appropriate device button (SAT/AUX or DVD) to set the remote to control the The remote device, for example, press DVD to control your DVD player.
Page 25
Manual Reset of Remote Manual Reset is used to reset the remote settings to default. The reset can also be done by replacing the batteries, but replacing the batteries does not Note: always cause a reset, so you can perform a manual reset if the remote doesn’t reset after battery replacement.
TV to the VID1 input, for example, when only works with you want to watch a tape on the VCR. To set up the Autotuning feature: other RCA devices. 1. Press MENU (the 2. Highlight Setup 3.
You can select from the following inputs or channels: Disabled Choose this if you don’t have a device connected to the TV or if you don’t want the TV to automatically tune to the correct channel/input when you’re using this device. Channel 3 or 4 Device is connected to the ANTENNA/CABLE jack on the back of the TV, and you want the TV to tune to channel 3 when you press the corresponding button on the...
Lock/Unlock Parental Controls Parental Control Go Back • When the Parental Control menu is accessed from the Main menu and the parental controls Lock Parental Control Select Channel 51 MTV are permanently unlocked, the following message is displayed: Block Channel Button Block V-Chip “Parental controls are UNLOCKED.
6. Use the MENU button repeatedly to get back to the Parental Control menu. Lock Parental Control 7. Select from the Parental Control menu for rating limits to take effect, you must press OK and enter a 4-digit password. To view age-based ratings after you've locked them, follow the same steps as above to unlock. Blocking Specific Content Themes You can block programs based on their content.
Blocking Canada V-Chip Ratings English Ratings Go Back If you receive Canadian programs you can block Canadian English and French V-Chip by CE-18+ CE-14+ ratings only. When you block a particular rating, you automatically block the higher rated pro- CE-PG CE-G CE-C8+ grams as well.
Change Password This option let you set a new V-chip password. 1. Press MENU on the remote control (the TV's Main Menu appears). 2. Select Parental Control 3. Select and press OK to display the password resetting menu. Change Password 4.
Using TV Menu Using Menu System This section explores the menus of your TV. Each menu is outlined and detailed to help you Main Menu Exit get the most from your TV. The Parental Control menu is discussed in Chapter 3. To access the Picture Sound menu system:...
Film Mode (3:2 Pulldown) Automatically detects video sources that were originally recorded on film (like most movies) and subsequently converted to a different format (for TV broadcast, for example). Film mode processes the converted signal so that it looks as close as possible to the original.
Channel Menu The Channel Setup menu lets you configure the TV to fit its surroundings and your preferences. Channel Press MENU on the remote, and then select Go Back Channel List Channel List Auto Channel Search List and Lables channel list. Press the up or down arrow button to highlight a channel then press OK to tune to the channel.
Analog CC Type If available, lets you select the captioning mode used for displaying captioning information. If you are unsure of the differences among the modes, you may prefer to leave the closed captioned mode set to CC1, which displays complete text of the program in the primary language in your area.
Other Information Frequently Asked Questions (FAQs) What’s the quickest way to view High Definition (HD) video? Connect an off-air antenna to the ANTENNA/CABLE Input to view free local digital channels. You might need to purchase an antenna. Go to page 14 for more information. Visit www.antennaweb.org for help deciding what type of antenna to use to receive the local digital channels available to you.
Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. TV Problems TV won’t turn on • Make sure the TV is plugged in. • Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else. •...
Buttons don’t work • The side panel controls may be locked (disabled). Use the remote control to unlock the side panel controls by Button Block selecting the • Unplug the TV for ten minutes and then plug it back in. Turn the TV on and try again. TV turns off unexpectedly •...
Then plug in the TV, turn on the TV, and see if the problem is fixed. If the problem remains, then please click on the Customer Support Menu at www.rca.com/television for updated FAQs or contact RCA Customer Support at the support number provided in your Warranty under How To Get Service.
V-Chip Rating Explanations US V-Chip Rating System TV-MA (Mature Audience Only) Specifically designed to be viewed by adults and may be unsuitable for children under 17. It contains one or more of the following content themes: crude indecent language (L), explicit sexual activity (S), or graphic violence (V).
G (General Audience) Programming considered acceptable for all ages groups. While not designed specifi- cally for children, it is understood younger viewers may be part of the audience. Violence Guidelines: Will contain very little violence, either physical or verbal or emotional. Will be sensitive to themes which could frighten a younger child, will not depict realistic scenes of violence which minimize or gloss over the effects of violent acts.
• Ninety (90) days from date of purchase for parts. What we will do: • At TTE’s discretion, pay an Authorized RCA Service Center for both labor charges and parts to repair your television, or replace your television with a refurbished/remanufactured unit. See “How to get service”...
Please complete and mail the Product Registration Card packed with your unit or register on-line at www.rca.com/television. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage.
TTE Technology, Inc. 101 West 103rd Street Indianapolis, IN 46290 @2008 TTE Technology Inc. RCA and associated marks are trademarks of THOMSON S.A. used under license to TTE Corporation. Printed in USA 72-L22HD31-E001A Part No.:...