Table of Contents
Advertisement
22
Chapter 2
Using the remote control
PIC
Press to display the
ON
OFF
•
When in TV mode, turns the TV on or off. If in another mode (SAT/AUX or DVD) and
programmed, will turn the device on or off.
REW, REPLAY, PLAY, NEXT, FWD, REC, STOP, PAUSE (buttons at TOP of the remote)
If programmed, provides transport control for some remote-controllable devices, for example,
VCRs or DVD players.
ZZZ (SLEEP)
Press to display the
SAT/AUX
Places the remote in SAT/AUX mode. If Autotuning is enabled, turns on the TV and
tunes it to the satellite or cable box Video Input Channel. This button lights when you press a
valid button in SAT/AUX mode (see Modes of Operation on page 28 for more details).
TV
Turns on the TV and puts the remote in TV mode. Also displays current status.
V-CHIP
Press to display the Parental Control submenu directly.
VOL - or VOL +
Decreases or increases the TV's volume.
Using the INPUT Button
Use the INPUT button to scroll through the available video input channels and view devices
you have connected to the TV.
1. Make sure the device you want to view is turned ON.
2. Press INPUT to tune to an available video input source and view the device.
3. To return to the previous channel, press INPUT until you return to the channel.
Programming Remote to Operate Other
Devices
The universal remote can be programmed to operate many brands of remote-controllable VCRs,
audio devices, DVD players, cable boxes, satellite receivers and other devices. In addition to
being programmed to operate your television, it's already programmed to operate some
RCA devices.
Notes:
The TV button can't be programmed on this remote to control any device; it controls only this TV.
•
The remote may not be compatible with all models of all brands of devices. It also may not
•
operate all functions of your device.
Find Out If You Need to Program Remote
To determine whether the universal remote needs to be programmed to operate one of the
devices connected to your TV, such as a DVD player, do the following:
1. Turn on the device (in this example, a DVD player).
2. Point the remote at the device.
3. Press the corresponding device button (in this example, DVD player).
4. Press ON•OFF to see if the DVD responds. If the DVD doesn't respond, you need to
program the remote to operate it.
Picture
submenus.
Time
menu and set
Sleep Timer
.
Advertisement
Table of Contents
