Advertisement
No.: Repair of ex equipment
5. Exchange of receiver hook for handset
Perform a visual and functional check after assembling the equipment
Repair manual
Example: ResistTel and ExResistTel
Index: 0
Screw in receiver hook
with metal spring into the
bottom of the telephone
upper part.
Rev.: 0
Repair manual
Remove handset
from the upper part
of the telephone.
Loosen
screws
fastening
the
receiver
hook using a key Tx20.
Remove receiver hooks
on both sides of the
telephone upper part.
Insert new receiver
hooks.
Note:
Push receiver hooks
outwards as far as
they will go and screw
them on. (torque 3Nm,
key Tx20)
Note:
The retention force
of the receiver can
be continuously
adjusted. Pushing
the receiver hooks
together
strengthens the
retention force
whilst pulling them
apart decreases it.
Page 1 of 15
for
Advertisement
