Connecting The Water Line To The Water Supply; Water Filter; Attaching The Internal Filter Into The - Smeg FQ75XPEDU Instruction Manual

Installation
3.9 Connecting the water line
to the water supply
Connect the water line to a water supply valve. If a
valve is not present or you are not sure, consult a
qualified plumber.
1- Slip the compression nut (A) and compression
sleeve (B) on the copper tubing (C) as shown
below.
2- İnsert the end of the tubing into the the water
supply connection (F) squarely as far as it will
go.
3- Using an adjustable wrench, tighten the
compression nut. Do not overtighten.
4- After turning on the water valve, make sure
that there is no leakage at both connection
points. If there is leakage, turn off the valve
immediately and tighten all joints.
F
B
A
C

3.10 Water filter

(in some models)
Your refrigerator may be equipped with an external
or internal filter depending on its model. To fit the
water filter, follow the instructions below referring
to the figures supplied:
3.10.1 Attaching the internal
filter into the refrigerator
10 / 30 EN
Refrigerator / User Manual