Network Settings - Panasonic KV-SSM100 Administrator's Manual

Network Settings

Select your method of network connection – Wired or Wireless...
1.
a. Wired Settings (default)
When DHCP checkbox is selected, the adapter will obtain the
IP address from the DHCP server on the network. Deselect this
checkbox to manually input the IP address settings.
Note: Ethernet cable must be attached to adapter from network
switch in order for IP address to be obtained.
You can choose to Enable/Disable DNS Update. When enabled, the
adapter will register its hostname with the DNS server, allowing
access to the unit through its hostname.
Press [Next], and then continue with
b. Wireless Settings
Connect to a Wi-Fi network by pressing [Wireless Discovery].
Note:
If necessary, see Before You Begin
n
SSID field, e.g., NETGEAR62, will be automatically populated.
n
You can also manually input the SSID information, if the adapter
cannot detect the SSID through Wireless Discovery.
If Wireless Discovery is selected, the Security Mode and Encryption
n
Mode fields are automatically populated.
2. Choose WiFi Network.
3. Press [Select].
4. Enter Security Key.
5.
Press [Next].
Note: If an error should occur, see Troubleshooting.
Share Management screen displays...
6. Continue with Shared Folder
KV-SSM100/KV-SS1100 Network Scanner Adapter Administrator's Guide
Shared Folder Configuration...
> Connection method is known.
Configuration...
18