Busbar Coloring - ABB COM600 Series Operator's Manual

1MRS756705
3.6.8.
COM600 series 5.1
Operator's Manual
abling the device from being turned on. The ability to turn off the capacitor device should
be available at all times.
The State tab in the dialog shows the current status of the capacitor bank device and the
blocking signal from the device, if the signal exists. The blocking value is displayed only
when its value is high or true.
Hot Line Tag and Information Tag can also be applied to the Tap Changer mode. For
detailed information, see 3.6.5.1, Hot Line Tag and 3.6.5.2, Information Tag.
Figure 3.6.7-1 Capacitor Bank Control dialog

Busbar coloring

Busbar coloring can be used to indicate the status of busbar sections in several different
ways. It can indicate which busbar sections are powered, unpowered or in certain other
states, or which voltage level each busbar section has, see Figure 3.6.8-1. Alternatively,
Capacitor_Bank_Control.png
29