3.6.5.2.
26
COM600 series 5.1
Operator's Manual
Information Tag
Information Tag is used to attach information to a switching device.
To apply Information Tag:
1. Open Switch Device Control Dialog by clicking the object on the single line dia-
gram.
2. Select the Information Tag tab.
3. Enter a short caption into the Caption text box.
4. Enter a description of the Information Tag.
5. Click Apply to apply the Information Tag.
Figure 3.6.5.2-1 Applying the Information Tag
To remove the Information Tag:
1. Open Switch Device Control Dialog by clicking the object on the single line dia-
gram.
2. Select the Information Tag tab.
3. Enter the password.
4. Click Remove to remove the Information Tag.
1MRS756705
Information_Tag.bmp