Color - Hotpoint SXBD922FWDUK Manual

Indesit Company
Freezer Temperature Setting
Function:
Set the temperature of the freezer in the following range: -16°C to -24°C. 1°C changes every time of
pushing.
Operation:
Temperature adjusting: push the button 'FRZ.TEMP.' once, and the icon of the freezer flashes.
Push the button again to adjust temperature. (The cycle of the adjustment order is the present
temperature- -16- --24- -16) The setting comes into effect after 5 seconds of temperature adjusting.
Holiday Mode
Push the button 'HOLIDAY' icon turn on, to enter the holiday mode. Push this button again to exit this
mode.
The system can close the refrigerator automatically. The refrigerator temperature is set at -15°C.
The closed compartments will not cool. The cooling compartments will operate at the set temperature.
Energy-Saving Mode
In the mode of energy saving, the refrigerator and freezer operate at the set temperature Trs= 7°C
and Trs= -15°C respectively.
QUICK REF.: push this button, and the indicator of quick cooling flashes, which indicates the
quick-cooling mode. The relevant icons and words flash. Push the unlock button to confirm it.
QUICK FRZ.: push this button, and the indicator of quick-freeze flashes, which indicates the
quick-freeze mode. The relevant icons and words flash. Push the unlock button to confirm it.
Push the button 'QUCIK FRZ' again when the quick-freeze icon flashes, the quick- freeze time shown
by the freezer changes in the cycle of 6h-8h-1 2h-24h-48h-exit the quick-freeze mode. Push the
button of 'LOCK/UNLOCK' to confirm it and the flash stops.
Quick FRZ. function is a design aim to maintain the nutritional value of frozen food. It can be
thoroughly frozen food in the shortest time. If you need frozen a lot of food in one time, we recommend
setting fast freezing feature 12h in advance, so the freezer could turn to a low temperature, and then
put into the food. At that time, the freezing capability speed up in freezer, frozen foods quickly and
effectively lock the foods nutrition.
Unlock
Under the lock state, push and hold the button 'LOCK/UNLOCK' for 3 seconds, the display panel
unlocks. If time is less than 3 seconds the unlock icon flashes, which means unlock failed.
Under the unlock state, push and hold the button 'LOCK/UNLOCK' for 3 seconds, it will be locked
manually, and the lock icon turns on.
Every time the operation button is pushed, it sets off a beep. Do not push any button after continuous
60 seconds, it will be locked automatically, and the lock icon turns on.
All operations (except the ice-water selector key and the filter reset key) under the unlock state are
available. Under the lock state, the lock icons flash with beep alarm when pushing other buttons.
11 of 17