Table of Contents
Advertisement
STEP 4: PLUG IN THE TV
Plug the end of the power cord into the wall outlet,
matching
the wide
blade of the plug with the wide slot in the outlet. Be sure to insert the
plug completely.
STEP 5: PLACE BATTERIES
IN REMOTE
Remove the battery
compartment
cover from the back of the
remote.
Insert fresh batteries.
Make sure that the polarities
(+ and -) are
aligned correctly.
Replace the cover.
STEP 6:TURN
ON THE TV
Press TV on the remote,
or press POWER on the TV itself.
Pressing the TV button
not only turns on the TV, but puts the remote
into TV mode, so that the buttons
on the remote will control TV
functions.
ON-SCREEN
PROGRAM
GUIDE
The TV is designed
to bring up the GUIDE Plus+ Gold on-screen program
guide when you use the TV button
on the remote to turn on the TV
(after you have set up the GUIDE Plus+ Gold system). For more
information
on setting
up the GUIDE Plus+ Gold system, see the next
section, Interactive
Setup.
To get out of the GUIDE Plus+ Gold System:
•
Press OK to exit the GUIDE Plus+ Gold system and tune to the
highlighted
channel.
•
Press GUIDE to exit the GUIDE Plus+ Gold system and tune to the
channel displayed in the View window.
•
Press CLEAR to exit the GUIDE Plus+ Gold system and go to the last
channel you were watching.
STEP 7: PROGRAM
TH E TV
Proceed to the next section, Interactive
Setup. The interactive
setup
routine
walks you through
the steps needed to fully configure
the TV.
The first steps ask you to select your preferred
language for the menu
system and to begin the auto channel search, which puts available
cable
TV or antenna signals into the TV's memory.
Projection
TV Only.
If the picture appears to have a double or
triple image or if you notice rings or halos
around objects, you may have to adjust the
color convergence.
Details can be found
under the Screen menu heading in the
"Using the Menu System" section of this
manual.
10
Hide quick links:
Advertisement
Table of Contents
