Table of Contents
Advertisement
Step 13: Door Installation & Adjustment
You will need for this page:
(QTY: 8)
Half-Open Position
Closed Position
The holes in the door slides allow
you to adjust the doors. Place the
door in the middle holes.
4
Repeat steps 1 through 3 for the left door.
Door Adjustment
If Doors do not align, raise or lower one side of the Door by placing
the Door screws through a different set of holes in the Door Slide.
Assemblies from Step 12:
•
Right Door Assembly (1)
•
Left Door Assembly (1)
Gable
Door Slide
Door Track
INSIDE BUILDING
Door
Front Floor Frame
1
2
3
26
From inside the building, put the
bottom of the right door assembly
(on your left when you are inside)
behind door jamb into the front
fl oor frame track.
Position the top of the door so
that the holes in the door line up
with the holes in the door slides.
Fasten the door to the door
slides using two #10Bx1/2" (13
mm) screws per door slide.
26BL
Advertisement
Table of Contents
