Table of Contents
Advertisement
Step 1: Door Track/Header Assembly
You will need for this page:
9396
SS
Door Track
(QTY:8)
1
Using the door track, with small holes on top,
join the header, short legs on top, as shown
using screws.
2
Position door slides onto the legs, from the
end of door track, as shown. Set this piece
aside for use in Step 4.
66769
Slides should be installed in Door Track prior to installation. However, if this step is overlooked
or if the Slides need to be removed for maintenance, the following procedure may be used.
To remove or install Door Slides:
•
Remove Doors from Slides and set aside.
•
Using pliers, bend down a corner of the Door Track.
•
Remove or install Door Slides.
•
Carefully bend the corner back into position.
1
1
10572
Front Header
Slide all four (4) Door Slides into Track
4
Long Leg
on top.
Door Slide
Door Slide
The door track/header assembly supports
the sliding doors and reinforces the front
wall. It is made up of 2 pieces.
13
END VIEW
CORRECT
10572
9396
66769
13BL
INCORRECT
Advertisement
Table of Contents
