Frames - Arrow Storage Products EPA64 Owner's Manual & Assembly Manual

Step 4: Frames
You will need for this page:
SS
SS
(QTY: 2) (QTY: 38)
1
Fasten the rear wall angle across the inside top of the rear wall using screws.
Fasten the rear wall channel across the
2
middle of the rear wall using screws.
The upper leg of the side wall angles
must face the outside of the building.
3 Fasten the side wall angles
across the inside top of the
side panels using screws.
4
Fasten the
channels across
middle of the side panels
using screws.
overlaps in rear corners
with screws.
5 Fasten the door track/
header assembly (from
step 2) across the top
of the front wall panels
using screws. See the
fi gure.
Door Track
side wall
the
Fasten
1 1
10565 9925
Rear Wall
Rear Wall
Angle
Channel
Gap 13/16" (2,1 cm)
Side Wall Angles Must
Face Outside Building
10564
3
Door Track/Header Assembly
10545
2
9925
Front
16
1 2
10545 10564
Side Wall Side Wall
Angle
Channel
Rear Wall Angle Must
Face Inside Building
1
10565
5
10564
4
10545
16BL
2