Removal steps of the wireless LAN card
In step
1
, unplug the connectors by using the antenna RF connector removal tool or pick the connectors
with your fingers and gently unplug them as shown.
Step
Screw (quantity)
2
M2 × 3 mm, wafer-head, nylon-coated (1)
When installing: Plug the gray cable into the main connector, and the black cable into the auxiliary
connector on the card.
1080 Coin-cell battery
For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 69
Removal steps of the coin-cell battery
DANGER
Use only the authorized battery specified for your computer. Any other battery could ignite or
explode.
76
ThinkPad E580 and E585 Hardware Maintenance Manual
Color
Torque
Silver
0.294 Nm
(3 kgf-cm)