1050 Memory Module; 1060 Internal Storage Drive - Lenovo ThinkPad E585 Hardware Maintenance Manual

When installing:
• Ensure that the connector is attached firmly.
• Do not press the top of the fan cover and the fan hub.
• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on
a
the part marked as shown in the following illustrations. Either too much or too less application of grease
can cause a thermal problem due to imperfect contact with a component. You need to peel the thin film
off from the rubbers marked

1050 Memory module

For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 69
• "1020 Internal battery" on page 71
Removal steps of the memory module
When installing:
Insert the notched end of the memory module into the slot at an angle of about 20 degrees. Press the
memory module firmly, and pivot it downwards until it snaps into place. Ensure that the memory module is
firmly installed in the slot and does not move easily.

1060 Internal storage drive

For access, remove these FRUs in order:
• "1010 Base cover assembly" on page 69
• "1020 Internal battery" on page 71
Attention:
74
ThinkPad E580 and E585 Hardware Maintenance Manual
b .