Blaupunkt MSF701 Owner's Manual page 7

Man's shaver
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
MSF701
1. Put a drop of fine, non-resinous household oil on the tip of your finger.
2. Distribute the oil evenly on the shaving foils.
3. Without applying pressure, dab the shaving foils with a soft, lint-free cloth or paper towel.
4.
Replacing the shaving foil unit and blades
It is recommended to replace the shaving foil unit and blades after 12 months of daily use.
To change the shaving foils:
1. Depress both release buttons to release the shaver head.
2. Pull the shaver head up and off.
3. Push the hooks on the left and right of the shaving foil unit into the shaver head frame 17
4. Pull the shaving foil unit down and out of the shaver head frame.
5. Dispose of the used shaving foil unit.
6. Place the new shaving foil unit in the shaver head frame so that:
a. the guide braces inside the shaver head frame extend into the guide grooves outside along the
shaving foil unit and
b. the recess in the shaving foil unit is on the same side as the recess inside the shaver head frame.
7. Place two fingers on the rear side of the integrated trimmer.
8. Push the shaving foil unit into the shaver head frame until the hooks audibly lock into the shaver
head frame.
9. Firmly mount the shaver head on the shaver until the locking mechanism audibly locks into
place.
10. Place the protective cap onto the shaver.
To change the shaving blades:
1. Depress both release buttons to release the shaver head.
2. Pull the shaver head up and off of the shaver.
3. Pull the shaver blades straight up and out of their brackets.
4. Dispose of the used shaver blades.
5. Mount the new shaver blades on the brackets.
6. Firmly mount the shaver head 2 on the shaver until the locking mechanism audibly locks into
place.
7. Place the protective cap onto the shaver.
Set of shaving foils and blades are available as an accessory Blaupunkt ACC012.
USING TRIMMER
Move the trimmer all the way out until it audibly locks into place. Use the On/Off switch to turn the
shaver on. Slowly guide the trimmer up to the hair you intend to cut. Always use short strokes to cut
your hair. Turn the shaver off.
LED DISPLAY
The white battery symbol will appear and it is permanent when using without adapter.
When using with the adapter, it is kept black, no symbol showed.
When charging, the red plug symbol will appear and it is permanent.
When finish charging, the white battery symbol will blink.
When battery capacity becomes low and the using time is left 3-5 minutes, the red plug symbol will
blink for gentle warning.
5

Advertisement

Table of Contents
loading

Table of Contents