Connecting The Device - RCA 20F524T User Manual

Connecting the Device

This connection allows you to connect a device that has Y Pb Pr jacks (Component Video), for
example, a DVD player. If the device you are connecting also has S-Video or composite video,
we recommend you use the component video input for better quality.
Component Video
cables (Y Pb Pr) are
color coded- green
(Y), Blue (Pb) and Red
(Pr).
audio cables are color
coded- Red= right audio;
white= left audio
+•? ABC DEF
GHI JKL MNO
PQRS TUV WXYZ
DIG•ANA
INPUT
button
CH LIST
GUIDE
Chapter 1
Using the example of a DVD player:
1. If necessary, connect your cable and/or antenna as described on page 5.
2. Connect your Y Pb Pr component video cables.
Connect three video grade cables to the Y Pb Pr jacks on the back of the TV and to
the Y Pb Pr outputs on the DVD player. Y Pb Pr cables are colored green, blue and
red. Just match the colors on the cables to the Y Pb Pr jacks.
3. Connect your audio cables.
Connect the audio (red and white) cables to the AUDIO R and L (COMPOSITE
INPUT) jacks on the back of the TV and to the audio output jacks on the DVD
player. Just match the colors.
Important - When using the Component video input (Y Pb Pr) jacks, use only
the Audio R/L jacks from the COMPOSITE INPUT for this connection.
Viewing the Picture from the Connected Device
The device in this example, a DVD player, is connected to the TV's Y Pb Pr jacks. To
view the DVD player:
1. Turn on the TV and the DVD player.
2. Press the INPUT button on the remote control to toggle through the Video Input
Channels until you see CVID displayed in the channel banner.
Connections & Setup
• To review other
connections, go to the next
page.
• If you are done connecting
devices to your TV, go to
page 1 to complete the
Initial Setup.
• If you want more details of
the jacks on your TV, go to
page 11.