Web Management Settings - Gemtek Systems WX-6215G User Manual

Web Management Settings

TURN ON POWER SUPPLY
Quick power cycle can caused system corruption. When power on, be careful not
to shut down in about 5 seconds, because data is writing to the flash.
START -UP & LOG IN
In order to configure the Wireless SOHO AP Router, you must use your web
browser (Microsoft Internet Explorer or Netscape) and manually input 192.168.0.1
into the address box and press Enter. Then Main Page will appear.
In order to configure the Wireless SOHO AP Router, you must input the user-
name into the User Name box. Enter the password into the Password box and
press the OK button. The default User Name is "admin". There is no default
password, leave the Password field blank.
Once you have logged-in as administrator, it is a good idea to change the
administrator password to ensure a secure connection to the Wireless SOHO AP
Router. The Advanced Settings section described later in this manual describes
how to change the password.
Once you have input the correct password and logged-in, the screen will
change to the Main Page screen.
6