Klein Tools CL1200 Instruction Manual

ENGLISH
8. Non Contact Voltage (NCV): > 25V AC
PRESS PRESS
and and
HOLD HOLD
1200
Symbols USED ON LCD
~
AC Measurement DC Measurement
-
Negative DC Value AT Auto Range Active
O.L. Overload: Range Exceeded Apo Auto Power-Off Active
Low Battery HOLD Hold Active
MIN MAX
Minimum Reading Maximum Reading
%
Duty Cycle Mode Frequency Mode
V Voltage Measurement A Current in Amps
Resistance in Ohms Diode Test
F Capacitance in Farads Continuity Test
n µ
Nano 10 -9 Micro 10 -6
m k
Milli 10 Kilo 10
-3 3
M
Mega 10 6

ELECTRICAL SPECIFICATIONS

DC Voltage Measurement
Range Resolution Accuracy
600mV ˜ 600V 0.1mV ˜ 100mV ± (0.5% + 4 digits)
1000V 1V ± (0.8% + 10 digits)
Overload Protection: 1000V
AC Voltage Measurement
Range Resolution Accuracy
600mV ˜ 750V 0.1mV ˜ 1V ± (2.0% + 5 digits)
Overload Protection: 750V RMS
Frequency Response: 45 to 400 Hz
Minimum Voltage for Frequency Measurement: 200mV
Response: Averaging
DC Current Measurement
Range Resolution Accuracy
600µA 0.1µA
± (1.2% + 3 digits)
2000µA 1µA
Overload Protection:
Voltage: 600V RMS
•
Current (leads): 2000µA
•
AC Current Measurement
Range Resolution Accuracy
600µA 0.1µA ± (2.0% + 5 digits)
2000µA 1µA ± (1.5% + 5 digits)
60A 0.01A ± (2.9% + 15 digits)
600A 0.1A ± (1.9% + 8 digits)
Overload Protection:
Voltage: 600V RMS
•
Current: (leads) 2000µA (clamp) 600A
•
Frequency: 45 to 400Hz
Minimum Current for Frequency Measurement: 400µA or 20A
Minimum Current for Clamp Measurement: 0.2A
Response: Averaging
Resistance Measurement
Range Resolution Accuracy
600 Ω ˜ 6M Ω 0.1 Ω ˜ 1k Ω ± (1.0% + 4 digits)
60M Ω 10k Ω
± (2.0% + 4 digits)
Overload Protection: 600V RMS
Capacitance Measurement
Range Resolution Accuracy
60nF ˜ 6000µF 0.01nF ˜ 1µF ± (3.5% + 6 digits)
Overload Protection: 600V RMS
Frequency Measurement (Voltage)
Range Resolution Accuracy
99.99Hz ˜ 499.9kHz 0.01Hz ˜ 100Hz ± (0.1% + 4 digits)
Overload Protection: 600V RMS Sensitivity: 2.5V RMS
Duty Cycle Measurement
Range Resolution Accuracy
1 ˜ 99% 0.1% ± (0.1% + 5 digits)
Overload Protection: 600V RMS Sensitivity: 1.2Vpp ~ 50Vpp
Frequency Range: < 500 Hz
Diode Test
Overload Protection Range Test Current Open Circuit Voltage
< 1.8V DC
600V RMS 6.0V Appx. 0.25mA
Continuity Test
Overload Protection Open Circuit Voltage Threshold (Appx.)
600V RMS < 0.44V <40Ω
Non Contact Voltage Detector
On Voltage
Appx. 25V AC
Specifications subject to change.
WARRANTY
www.kleintools.com/warranty
CLEANING
Turn instrument off and disconnect test leads. Clean the instrument by using
a damp cloth. Do not use abrasive cleaners or solvents.
STORAGE
Remove the batteries when instrument is not in use for a prolonged period of
time. Do not expose to high temperatures or humidity. After a period of storage
in extreme conditions exceeding the limits mentioned in the Specifications
section, allow the instrument to return to normal operating conditions before
using it.
DISPOSAL / RECYCLE
Do not place equipment and its accessories in the trash. Items
must be properly disposed of in accordance with local regulations.
CUSTOMER SERVICE
KLEIN TOOLS, INC.
450 Bond Street
Lincolnshire, IL 60069
1-877-775-5346
customerservice@kleintools.com
www.kleintools.com
139701 Rev. 01/14 B
CL1200
Instruction Manual
ENGLISH
• DATA HOLD
• BACKLIGHT
• WORKLIGHT
• ANALOG
BAR GRAPH
• MAX / MIN
1200
• 3-5/6 DIGIT
5999 COUNT LCD
• AUTO / MANUAL
RANGE
• NON CONTACT
VOLTAGE TESTER
750V
1000V
600A