Hardware Compatibility Matrix For Cisco Cbr Series Routers; Servers Required On The Hfc Network - Cisco cBR Series Configuration Manual

Hardware Compatibility Matrix for Cisco cBR Series Routers

•
•
•
•
•
•
•
•

Hardware Compatibility Matrix for Cisco cBR Series Routers

Note The hardware components introduced in a given Cisco IOS-XE Release are supported in all subsequent
releases unless otherwise specified.
Table 5: Hardware Compatibility Matrix for the Cisco cBR Series Routers
Cisco CMTS Platform
Cisco cBR-8 Converged
Broadband Router

Servers Required on the HFC Network

A TFTP server, DHCP server, and time-of-day (TOD) server are required to support two-way data cable
modems on an HFC network. A cable modem will not boot if these servers are not available. The log server
and security servers are not required to configure and operate a cable modem. If the log server or security
Cisco cBR Series Converged Broadband Routers Application-Voice and Video Configuration Guide
38
Activating Scripts in Cisco Network Registrar, page 47
Configuring the Cisco CMTS Routers to Use Scripts, page 47
Configuring the System Default Policy, page 48
Creating Selection Tag Scopes, page 48
Creating Network Scopes, page 49
Creating Policies for Class of Service or for Upgrading Cable Modem Cisco IOS Images, page 50
CNR Steps to Support Subinterfaces, page 50
Additional References, page 51
Cisco Network Registrar for the Cisco CMTS Routers
Processor Engine
Cisco IOS-XE Release 3.15.0S
and Later Releases
Cisco cBR-8 Supervisor:
• PID-CBR-CCAP-SUP-160G
• PID-CBR-SUP-8X10G-PIC
Interface Cards
Cisco IOS-XE Release 3.15.0S
and Later Releases
Cisco cBR-8 CCAP Line Cards:
• PID-CBR-LC-8D30-16U30
• PID-CBR-RF-PIC
• PID-CBR-RF-PROT-PIC