Table of Contents
Advertisement
Speaker Button
Allows you to talk to a caller hands free using the Speakerphone. The Speakerphone
remains in use unless you pick up the Handset or press the Headset button.
Headset Button
Allows you to talk to a caller using a headset. The headset jack supports a standard
2.5 mm plug. The Headset operation remains for the duration of the call until you
press the Speaker button or you pick up the Handset.
NOTE: If the headset is diconnected during a call, the call remains active unless the person on
the line hangs up, or you press the Headset button again.
Mute Button
Allows you to temporarily turn off the microphone on the Handset/Receiver, Head-
set, or Speakerphone during a call so the person on the line cannot hear you.
Page Button
Pages all Cordless Handsets. Each Cordless Handset can be paged individually using a
Memory Button.
Flash Button
Sends a signal to a phone line to retrieve a dial tone after you end a call, or to per-
form the call waiting feature provided by your local phone company during a call.
Hold Button
Allows you to temporarily suspend a call up to 30 minutes.
DND (Do Not Disturb) Button
Press to activate a silent ring on all incoming calls, The DND button flashes if Do Not
Disturb is turned on.
Features
1
Advertisement
Table of Contents
Troubleshooting
