Programming Tips - Chamberlain MC100AML Manual

LOCATING THE LEARN BUTTON
In order to program the Universal Remote, the LEARN button on the
garage door opener must be located. This will need to be activated
during the programming sequence.
The LEARN button may also be labelled, CODE, CODE SET,
DOOR CODE, RADIO SET, 'S', or similar.
Refer to your Opener Owner's Manual for more information.
Here are examples of the LEARN button position
Sectional & Tilt Door Openers
Indicator LED
Learn Button
Roller Door Openers
Learn Button
1 3
DN
2 S
UP P

PROGRAMMING TIPS

When programming two doors at the one site, we recommend programming
the TOP button first. This is to avoid accidentally operating a
preprogrammed door. Alternatively turn off any preprogrammed doors.
The Bottom Button is the PROGRAMMING button and is the only button
that can commence the programming sequence, irrespective of which button
you choose to control the door.
The operate buttons require a firm press, this is to eliminate accidental
activation due to mishandling the remote.
This remote only operates with 433.92MHz radio control systems.
3