System Configuration - Dell Precision 7920 Owner's Manual

Option
Advanced Boot Options
Date/Time
UEFI Boot Path Security

System configuration

Table 7. System Configuration
Option
Integrated NIC
Integrated NIC 2
UEFI Network Stack
Serial Port
74 System Setup
Description
Allows you to Enable Legacy Option ROMs
• Enable Legacy Option ROMs—Default
• Enable Attempt Legacy Boot
Allows you to set the date and time. The changes to the system date
and time take effect immediately.
Allows you to control whether the system prompts the user to enter
the Admin password when booting to a UEFI boot path.
Click one of the following options:
• Always, Except Internal HDD—Default
• Always
• Never
Description
Allows you to configure the integrated network controller. The
options are:
• Enable UEFI Network Stack
• Disabled
NOTE: You can use the Disabled option, only if Active
Management Technology (AMT) option is disabled.
• Enabled
• Enabled w/PXE (Default)
Allows you to configure the integrated network controller. The
options are:
• Enabled (Default)
• Enabled w/PXE
NOTE: This feature is supported only on Tower 7920.
Allows pre-OS and early OS networking features to use any enabled
NICs.
• Enabled UEFI Network Stack
This option is set by default.
Identifies and defines the serial port settings. You can set the serial
port to:
• Disabled
• COM1 (Default)
• COM2
• COM3
• COM4