Installing the slim ODD and ODD latch
1
Place the ODD latch into its position on the ODD drive and lock it.
2
Slide the optical drive into the drive bay from the front of the system until it fits in to place.
3
Connect the data cable and power cable to the connectors on the optical drive.
4
Install the
right side cover
5
Follow the procedure in
Power distribution and fan control board
Removing the power distribution and fan control board
1
Follow the procedure in
2
Remove the:
a
PSU
b
right side cover
3
To remove the power distribution and fan control board:
a
Press the tab on both sides of the connector and disconnect the power cable on the control board [1].
b Disconnect the fan cables from the connectors on the control board [2].
c
Disconnect the power, PDB, and power VGA cables from the connectors on the control board [3].
After working inside your computer
Before working inside the
computer.
Removing and installing components
41