Dell Precision 7920 Owner's Manual page 75

Option
SATA Operation
7910 Tower
Drives
7910 Tower
PCIe Drives
SMART Reporting
USB Configuration
Description
NOTE: The operating system may allocate resources even
if the setting is disabled.
Allows you to configure the internal SATA hard-drive controller. The
options are:
• Disabled
• AHCI
• RAID-On (Default)
NOTE: SATA is configured to support RAID
mode.
• SATA–0
• SATA–1
• SATA–2
• SATA–3
• SATA–4
• SATA–5
• SATA–6
• SATA–7
• SATA–8
Default Setting: All drives are enabled.
NOTE: If the hard drives are connected to a RAID
controller card, the hard drives will display {none} in all the
fields. The hard drives can be seen in the RAID controller
card BIOS.
Allows the enabling of Front PCIe attached Ports.
• MiniSAS PCIe SSD-0
• MiniSAS PCIE SSD-1
• MiniSAS PCIe SSD-2
• MiniSAS PCIE SSD-3
Default Setting: All drives are enabled.
This field controls if the hard drive errors for the integrated drives
are reported during system startup. This technology is part of the
SMART (Self Monitoring Analysis and Reporting Technology)
specification.
• Enable SMART Reporting - This option is disabled by default.
Allows you to enable or disable the internal USB configuration. The
options are:
• Enable Boot Support
• Enable Front USB Ports
• Enable internal USB ports
• Enable rear USB Ports
System Setup 75