Advertisement
plAYING A DISC
Basic playback
This owner's manual explains the basic instructions for operating this unit. Some DVDs are produced in a manner
that allows specific or limited operation during playback. Therefore, this unit may not respond to all operating
commands. THIS IS NOT A DEFECT. please refer to the instructions accompanying the specific DVD in question for
more information about the options available on that DVD.
"
" may appear on the screen during operation. A "
" means that the desired operation is not permitted by the
unit or disc.
Playing a Disc
1. Slide the STANDBY / ON switch on the top of the unit to the ON position.
See
CuSTOmIZING THE FuNCTION SETTINGS
before proceeding to step 2.
2. Press the
button to open the front panel, press the inside disc switch to open the disc door.
3. Hold the disc by its sides and carefully place it onto the spindle with the label side facing up, pushing gently until you hear
a "click".
4. Gently push the disc door closed. It takes a short while for your unit to load the disc. After loading, for most DVDs, the unit
will automatically start playing or take you to the main menu.
5. If the unit does not automatically start playing the DVD, press the
plAY button.
press here to open
Pausing Playback (Still Mode)
Press the
pAuSE button. To resume normal playback, press the
plAY button.
Each time you press the
pAuSE button, the picture advances one frame on a DVD.
Stopping Playback
Press the
STOp button at the location where you want to interrupt playback. To resume playback at the position where the
plAY button.
disc was stopped, press the
If you press the
STOp button twice, the unit's memory will be cleared and pressing the
plAY button will reset the disc to
the beginning.
Fast Forward / Fast Reverse
1. Press the SEArCH
or
SEArCH button when a disc is playing. Each time you press the SEArCH
or
SEArCH button, the playback speed changes in the following sequence:
x 2
x 4
x 8
x 16
x 2
x 4
x 8
x 16
2. Press the
plAY button when you reach the desired point to resume normal playback.
Notes:
• The DVD player mutes sound and subtitles during reverse and forward scan of DVDs.
• The fast playback speed may differ depending on the disc.
Skip (Forward / Reverse)
• Press the
NEXT button to advance chapters/tracks.
• Press the
prEV button to go back to current or previous chapters/tracks.
• For Audio CDs, use the number buttons on the remote control to jump directly to the desired track.
Audio Selection
On some DVDs, the sound is recorded in two or more formats. Follow the directions below to select the preferred language
and sound system.
1. While a disc is playing, press the AuDIO button to show the current audio format number.
2. Press the AuDIO button repeatedly to select the desired audio format.
Notes:
• If only one audio format is recorded on the DVD, the number does not change.
• Some DVDs allow you to change audio selections via the disc menu only. If this is the case, press the mENu button and
choose the appropriate language on the disc menu.
• You can select different audio channels (Stereo, Left or Right) on an Audio CD by pressing the AuDIO button repeatedly.
Subtitle Selection
DVD
1. While a DVD is playing, press the SuBTITlE button to display the current language setting, as shown in
1/4
the example.
2. Press the SuBTITlE button repeatedly to select the desired subtitle language. You can turn subtitles off by pressing the
SuBTITlE button repeatedly until "
Off
" is displayed.
Notes:
• Some DVDs are set to display subtitles automatically, and you cannot turn them off even if you set the subtitle function to
off.
• During some scenes, the subtitles may not appear immediately after you select your desired scene.
• The number of subtitle languages recorded differs depending on the disc. If only one language is recorded, the language
does not change.
• This function can only be used for discs on which subtitles have been recorded in multiple languages.
• Some DVDs allow you to change subtitles via the disc menu only. If this is the case, press the mENu button and choose the
appropriate subtitle on the disc menu.
Angle Selection
DVD
Some DVDs contain scenes which have been shot from a number of different angles. For these discs, the same scene can be
viewed from each of these different angles.
1/3
1. While you are playing a DVD with different angles recorded, press the
ANGlE button to view the number of current angles available.
Sequence of angle shots
2. Press the ANGlE button repeatedly to change the scene to the next
(Example)
recorded angle.
• After approx. two seconds, playback will continue from the new angle
selected.
• If no button is pressed within 10 seconds, playback continues without
changing the current angle.
Notes:
• This function can only be used for discs on which scenes shot from multiple angles have been recorded.
• If only one angle is recorded, "
1/1 " is displayed.
Sequence of DISplAY
(Example)
Display Function
DVD
Elapsed Time
00:05:18
While the disc is playing, press the DISplAY button repeatedly to display information
on operation status.
Remain Time
00:30:28
Title 1/3
Chapter 1/5
Elapsed Time: Elapsed time from the beginning of the title which is currently playing.
remain Time: Remaining time of the title which is currently playing.
Audio
Subtitle 1/4 Eng
Adjust the LCD Screen
DVD
Angle 1/3
You can adjust the Brigntness, Contrast, Color or View Mode of the LCD screen.
1. Press the VIDEO mODE button.
2. Press the
/
button to select Brightness, Contrast, Color or View Mode.
3. Then press the
/
button to change the setting.
(For View Mode, press the ENTEr button to change the setting.)
4. Press the VIDEO mODE button to exit the menu.
E - 7
PVS72830 IB UL English RCA W011.indd 2
rEpEAT plAYBACK
You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat)
Repeating a Chapter
DVD
1. While the DVD is playing, press the rEpEAT DISC button until the "
" indicator displays on the screen. The
Repeat Chapter
current chapter is played repeatedly.
Repeating a Title
2. While the DVD is playing, press the rEpEAT DISC button until the "
" indicator displays on the screen. The
Repeat Title
current title is played repeatedly.
To Resume Normal Playback
3. While the DVD is playing, press the rEpEAT DISC button until the "
Repeat Off
" indicator displays on the screen.
Repeating a Single Track
1. While the CD disc is playing, press the rEpEAT DISC button until the "
Repeat single
" indicator displays on the screen. The
current track is played repeatedly.
Repeating a Whole Disc
2. While the CD disc is playing, press the rEpEAT DISC button until the "
" indicator displays on the screen. The
Repeat all
whole disc is played repeatedly.
To Resume Normal Playback
3. Press the rEpEAT DISC button until the "
" indicator displays on the screen.
Repeat off
Repeating a Specific Section
You can play a specific section repeatedly.
1. While the disc is playing, press the rEpEAT A-B button at the beginning of the section ("
" is displayed) you want to
Rep A-
play repeatedly.
2. Press the rEpEAT A-B button again at the end of the section ("
Rep A-B
" is displayed).
3. The Unit will immediately begin replaying your selection.
To Resume Normal Playback
4. While the disc is playing, press the rEpEAT A-B button until the "
" indicator displays on the screen.
RepAB Off
Notes:
• Some discs may not permit A-B repeat operation.
• You can not set the A-B repeat function for a segment that includes multiple camera angles.
• You can specify a segment only within the current title or track.
• There may be a slight difference between point A and the location where playback actually resumes depending on the disc.
lOCATING A DESIrED SECTION
Locating a Specific Title
DVD
If a DVD contains title numbers, you can locate a specific title by directly selecting its title number.
1. Press the GOTO button.
Title
- - -
2. Press the corresponding number button(s) for the title you want.
3. Press the ENTEr button to confirm. Playback starts from the selected section.
Locating a Specific Chapter
DVD
If you know the chapter number for the chapter that you want to play, you can locate it by directly selecting that number.
1. Press the GOTO button.
2. Press
or
button to display Chapter and press the corresponding number
Chapter
- - -
button(s) for the chapter you want.
3. Press the ENTEr button to confirm. Playback starts from the selected section.
Locating a Specific Time
You can move to a specific location by entering its corresponding time (hours, minutes, seconds).
1. Press the GOTO button.
Time
- - : - - : - -
2. Press
or
button to display Time and press the corresponding number buttons for
the setting point you want.
3. Press the ENTEr button to confirm. Playback starts from the selected section.
Notes:
• If the numbers you entered is not permited by the DVD, after you press the ENTEr button, it will restore to "- - -". You
should re-enter correct numbers.
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as you specified.
• This method for accessing specific locations is available only within the current title of the DVD.
DVD prOGrAmmABlE mEmOrY
Playing Titles/Chapters in a Favorite Order
You can combine your favorite titles/chapters and play them in the order you determine.
1. When a DVD is stopped, press the mEmOrY button, the right display appears.
2. Select the items in the order you want by pressing the number buttons.
Each time you press the Cursor buttons ( , , , ), the space is highlighted. Highlight
where you want to enter, then press the corresponding number buttons.
3. Press the Cursor buttons ( , , , ) to move the highlighted bar to Play Memory, then
press the ENTEr button.
Title
Chapter
The DVD player starts memory playback.
4. To resume normal playback from memory playback
1). When a DVD is stopped, press the mEmOrY button.
2). Press the Cursor buttons ( , , , ) to move the highlighted bar to "Clear All", then press the ENTEr button. All the
input programs will be cleared.
3). Press the
plAY button to resume normal playback.
Notes:
• If the title or chapter numbers you entered is not permited by the DVD, after you press the ENTEr button, it will restore to "-
- -". You should re-enter the correct numbers.
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player repeats the current memory playback.
• If you press the mEmOrY button while the display appears on the TV screen, the display disappears.
• The programmed selections will be cleared when you open the disc tray or turn off the DVD player.
VIEWING JpG FIlES
This unit can play JPG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommended).
Viewing JPG Files
1. Press the
button to open the front panel, press the inside disc switch to open
the disc door.
2. Hold the disc by its edges and gently push it onto the spindle with label side
facing towards you until you hear a "click".
3. Close the disc door. A list of folders/files will appear on the screen.
4. Press the
or
button to select your desired file. The selected picture will
appear in the lower right corner. Press the
plAY button to start playback.
Press the
STOp button to display a folder list.
Notes:
• You can press the pAuSE button to freeze the picture, and press the
plAY button to resume slide show.
• You can press the STOp button to quit playback.
• You can press the
prEV or
NEXT button to change the picture. Press the
prEV button to view the previous
picture. Press the
NEXT button to view the next picture.
o
• You can press the ANGlE buttonon on the remote control to rotate the direction of the picture by 90
.
• Some discs may not permit this operation.
E - 8
plAY mODES FOr CD Or JpG DISC
When play CD / JPG discs, you can modify the Play Modes through the Toolkit which appears on the right of below picture on
the screen. Press the
/
button to navigate between the windows and the
/
button to select files/tracks or play mode
items. Then press the ENTEr button.
1. In Stop mode, press the Cursor buttons ( , , , ) to select "Edit mode" then press the ENTEr button.
2. Use the Cursor buttons ( ,
, , ) to select tracks/files shown on the left hand side of the window. Press the ENTEr
button to confirm the selected tracks/files. "
" will appear in front of the selected tracks/files.
3. Select "Add to program" then press the ENTEr button. "
" will disappear from the screen. It means that the tracks/files
you have selected are added into the "Program view".
4. Select "Program view" to view programmed files. To add more files by "Browser view" repeat the above steps.
5. Press the
plAY button to start the program playback.
The Toolkit has the following play mode items:
• repeat (Off/Single/All):
Off: Resumes normal playback.
Single: Repeats the current track/file.
All: Repeats all files on the current folder or all tracks on the disc.
• mode (Normal / Shuffle / music intro):
Normal: Resumes normal playback.
Shuffle: Playbacks track/file in random order.
music intro (for Audio CD only): Only playbacks the first 10 seconds of all the
tracks on the current folder/disc.
• Edit mode: Program operation works only when "Edit mode" is selected.
• program view: To view tracks/files in the "Program view" list. It is disabled when the "Program view" list is empty.
• Add to program: Add files/tracks to the "Program view" list. It is disabled if the "Edit mode" is not selected.
• Browser view: To view files/tracks in the original view list.
• Clear program: Delete the files/tracks in the "Program view" list.
Select a file/track or more you want to delete in complete stop mode (press the
STOp button twice). "
" will appear
besides the deleted file/track. Select "Clear program" and then press the ENTEr button. It is disabled if the "Edit mode" is
not selected.
Note:
The program will be deleted if disc door is opened or selected files are deleted by selecting "Clear program" in "Edit mode".
CuSTOmIZING THE FuNCTION SETTINGS
language
OSD Language
1. Press the SETup button in stop mode.
2. Press the
button to select OSD Language.
3. Press the ENTEr button, then the
/
button to shift and change the
Language.
4. Press the ENTEr button.
5. Press the SETup or rETurN button to exit the menu.
Subtitle
1. Press the SETup button in stop mode.
2. Press the
button, then the
/
button to select Subtitle.
3. Press the ENTEr button, then the
/
button to shift and change the
Language.
4. Press the ENTEr button.
5. Press the SETup or rETurN button to exit the menu.
Notes:
• Some DVDs are programmed with a specific language. You may not be
able to change this feature.
• Some DVDs allow you to change subtitle selections via the disc menu
only. If this is the case, press the mENu button and choose the appropriate subtitle language from the selection on the
disc menu.
Audio
1. Press the SETup button in stop mode.
2. Press the
button, then the
/
button to select Audio.
3. Press the ENTEr button, then the
/
button until your preferred Audio
is displayed.
4. Press the ENTEr button.
5. Press the SETup or rETurN button to exit the menu.
Note: Some DVDs are programmed with a specific language. You may not be
able to change this feature.
DVD Menu
1. Press the SETup button in stop mode.
2. Press the
button, then the
/
button to select DVD Menu.
3. Press the ENTEr button, then the
/
button until your preferred DVD
Menu language is displayed.
4. Press the ENTEr button.
5. Press the SETup or rETurN button to exit the menu.
Note: Some DVDs are programmed with a specific language. You may not be
able to change this feature.
Video
Aspect Ratio
Aspect Ratio
1. Press the SETup button in stop mode.
2. Press the
/
button to select Video.
3. Press the
button, then the
/
button to select Aspect Ratio.
4. Press the ENTEr button, then the
/
button to shift and change the
aspect ratio.
5. Press the ENTEr button.
6. Press the SETup or rETurN button to exit the menu.
Notes:
• The displayable picture size is preset on the DVD. Therefore, the playback picture of some DVDs may not conform to the
picture size selected.
• When you play DVDs recorded in the 4:3 picture size only, the playback picture always appears in the 4:3 picture size
regardless of the Aspect Ratio setting.
• Select 16:9 to conform to the LCD screen on the unit. Always be sure that your Aspect Ratio conforms to the actual TV in
use if you connect the unit to a TV.
View Mode
1. Press the SETup button in stop mode.
2. Press the
/
button to select Video.
3. Press the
button, then the
/
button to select View Mode.
4. Press the ENTEr button, then the
/
button to shift and change the
View Mode.
5. Press the ENTEr button.
6. Press the SETup or rETurN button to exit the menu.
Fill
Fill the screen with decoded image.
Original
Display image as its original size.
Auto Fit
Automatically fit the decoded image on screen without
distortion. Black bars will be present on top/bottom or left/right of screen.
pan Scan
Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Sides of the picture
are cut off.
Note: Depending on the DVD, you may not be able to view the mode as selected.
E - 9
misc
use Default Settings
1. Press the SETup button in stop mode.
2. Press the
/
button to select Misc.
3. Press the
button, then press the
/
button to select Use Default
Settings dialogue box.
4. Press the ENTEr followed by the
/
button to select "Yes", then press
the ENTEr button. The original setting will be restored. The unit will exit
the menu automatically and re-load the disc in the disc tray.
Note: It will take 3-5 seconds to reset the DVD player to the factory default.
Screen Saver
1. Press the SETup button in stop mode.
2. Press the
/
button to select Misc.
3. Press the
button, then press the
/
button to select Screen Saver.
4. Press the ENTEr button, then press the
/
button to change the On/
Off mode.
5. Press the ENTEr button.
6. Press the SETup or rETurN button to exit the menu.
mAINTENANCE
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop out during playback.
Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the center outward with a cleaning cloth.
• NEVER use solvents such as benzine or alcohol to clean the disc.
• Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause malfunctions.
Cleaning the unit
• Be sure to turn the unit off and disconnect the AC power adapter before maintaining the unit.
• Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been dipped in a
weak soap-and-water solution and wrung out thoroughly, then wipe with a dry cloth.
• Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed air to remove dust.
Important Note
• Before transporting the unit, remove any disc from the disc compartment.
TrOuBlESHOOTING GuIDE
SYMPTOM
CAUSE (AND REMEDY)
No power.
• Ensure the AC power adapter is connected.
• The unit is not turned on.
The remote control does
• Make sure the infrared remote sensor is not blocked.
not function.
• Make sure the plastic sheet has been removed from the remote control.
• Point the remote directly at the infrared remote sensor on the unit.
• Replace the battery in the remote control with a new one.
• Use remote control with GREEN keys with the unit which has GREEN mark.
Use remote control with BLUE keys with the unit which has BLUE mark.
No sound or only a very
• Make sure ON mode was selected.
low-level sound is heard.
• The volume control is located on the side of the unit – please try adjusting this.
• The system is in pause mode. Press the
plAY button to return to normal play mode.
• The unit is in fast-forward or fast-reverse mode. Press the
plAY button to return to normal
play mode.
• Make sure the AUDIO/VIDEO output connections are correct.
• The DTS DVD cannot be decoded to have speaker output.
• The unit is too hot; shut off the unit for 30 minutes to cool it down.
No picture
• The region number of the disc doesn't match the region number of this unit.
The picture is not clear
• Clean the disc.
• The disc is scratched.
• Adjust the LCD's brightness, contrast and color using the VIDEO mODE button on the remote
control.
Severe hum or noise is
• The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with alcohol.
heard.
• Clean the disc.
The disc does not play.
• There is no disc inside ("No Disc" appears on the screen).
• Insert the disc correctly with the playback side facing down.
• Clean the disc.
• A non-NTSC disc has been inserted. The unit and disc region number are incompatible.
• Condensation may have formed inside the unit due to a sudden change in temperature. Wait
about an hour for it to clear and try again.
The picture is up-side-
• Press the
button located on front of player.
down
Specifications and external appearance are subject to change without notice.
Need more Help?
please
visit online help at
http://www.rCAav.com
DO NOT rETurN THIS prODuCT TO THE STOrE
Printed in China
811-728391W011
user manual
DRC97283
AVC Multimedia
Markham, Ontario L3R 1E3
http: //www.RCAav.com
Read these instructions before using your new product for the first time.
SAFETY prECAuTIONS
WArNING: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
WArNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE. DO NOT PLACE OBJECTS
FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.
CAuTION: USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER
The lightning flash with an arrowhead symbol, within the
THAN THOSE SPECIFIED MAY RESULT IN
equilateral triangle, is intended to alert the user to the
HAZARDOUS RADIATION EXPOSURE.
presence of uninsulated "dangerous voltage" within the
CAuTION: DANGER OF EXPLOSION IF BATTERY
product's enclosure that may be of sufficient magnitude
IS INCORRECTLY REPLACED. REPLACE ONLY
to cause an electric shock.
WITH THE SAME OR EQUIVALENT TYPE.
The exclamation point within the equilateral triangle is
CAuTION
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in this
I
NVISIBlE lASEr rADIATION WHEN
owner's manual.
OpEN.
AVOID EXpOSurE TO BEAm.
* SEE BOTTOm OF uNIT FOr GrApHIC SYmBOlS *
This product
THIS ClASS B DIGITAl AppArATuS COmplIES
contains a low
WITH CANADIAN ICES-003.
power laser device.
On Placement
• Do not use the unit in places that are extremely hot, cold, dusty or humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by
placing it on carpeting.
• To avoid magnetized, do not place the unit near speaker or magnet.
• Do not use this unit in direct sunlight or leave the unit in a closed automobile (or yacht, etc) where it would be
exposed to high temperatures above 104°F (40°C).
• No naked flame sources such as lighted candles should be placed on the AC power adapter and main unit.
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on apparatus.
On Safety
• When connecting or disconnecting the AC power adapter, grip the plug and not the cord itself. Pulling the cord
may damage it and create a hazard.
• When you are not going to use the unit for a long period of time, disconnect the AC power adapter.
On Condensation
• When left in a heated room where it is warm and damp, water droplets or condensation may form inside the unit.
When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1 to 2 hours
before turning the power on, or gradually heat the room and allow the unit to dry before use.
Ventilation Warning
• Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper
or cloth, etc., the heat may not be able to get out.)
• Do not operate the unit in a confined space, such as a bookcase or built-in cabinet, allow about 4 inch (10cm) of
free space all around the unit for adequate ventilation.
Rating Plate Location
• The rating plate is located on the bottom of unit.
FCC Statements
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
WArNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
WArNING: Should any trouble occur, disconnect the AC power adapter and refer servicing to a qualified
technician.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted material
without permission.
Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132 and 5,583,936 licensed for limited
viewing uses only.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual
property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended
for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or
disassembly is prohibited.
E - 1
2010-2-2 17:47:30
Advertisement
