Table of Contents
Advertisement
Installing the Software
You can install the device driver for DOS or for Windows
¡ Do not install DOS Driver when the program of Windows 95 is going on.
(Remark CD-ROM Driver in the state of Config. Sys.)
1
Turn on your computer and wait for it to boot.
2
Insert the driver disk into a floppy disk drive(usually the A drive).
If you are a...
3
DOS user
Windows user
Windows 95user
4
Run the CDSETUP program:
If you are a...
DOS user
Windows user
5
To...
Confirm the installation
Exit without installing
Result :
If you answer Y(Yes), the installation program automatically
Creates a SAMSUNG directory on your hard disk
Copies the required softwares (mscdex.exe and sscdrom.sys)
Modifies the CONFIG.SYS and AUTOEXEC.BAT files
When the Setup Completed screen is displayed, remove the
6
installation floppy disk from the drive.
7
Reboot your system.
Result :
The computer restarts
Both the device driver and MSCDEX are loaded
Then :
Type a: at the DOS prompt
Press the RETURN key
Access the File Manager
Click on the A icon.
When you are in Windows 95, it is not
necessary to install Device Driver.
Whereas, when you are in Dos Mode of
Windows 95, then install as follows.
Click on MY COMPUTER icon.
Click on the A icon.
Then :
Type CDSETUP after the
Press RETURN
Double-click CDSETUP.EXE from the Windows
File Manager
Then enter...
Y
N
5
a:
prompt
Advertisement
Table of Contents
