Samsung SC-140 User Manual page 4

Rear View of the CD-ROM Drive
1 2 3
1
Digital Audio
You can connect a sound card or MPEG card which support Digital Audio to your drive using this
two-pin connector.
2
Audio Output Connector
You can connect a sound card to your drive using this four-pin connector.
This function is not covered in detail in this guide. Refer to the documentation
supplied with your sound card.
3
Device Configuration Jumper
Usually, this is a pre-set configuration as illustrated below.
Verify that the setting is as illustrated. If it is not, simply remove the jumper
and place it in the correct position.
4
Host IDE Interface connector
This input/output interface connector is used to connect the 40-pin flat cable from the IDE
interface to the CD-ROM drive.
5
Power Connector
The power connector is a four-conductor male plug.
4 5
C S M
S L A
3