Using The Ac Power Adapter; Connections; Connecting To A Tv; Video Equipment - RCA DRC62708 User Manual

B. Using the AC power Adapter
The included AC power adapter operates on AC between 100V-120V.
• The supplied AC power adapter is suitable for use on AC mains supplies of 100-120 Volts AC and should
only be connected to a mains supply within these parameters.
DVD Player A
2
To AC
wall outlet
AC
adapter
1
To DC IN
9V-12V jack
Cautions:
• Turn off the unit before unplugging the AC power adapter to avoid damage to the unit.
• When the unit is not going to be used for a long time, disconnect the AC power adapter from
the AC outlet.
• The AC power adapter included with this unit is for its use only. Do not use it with other
equipment.
IMPORTANT
• Be sure to use the unit close to the wall outlet and make it is easily accessible. If a malfunction occurs,
disconnect the plug from the wall outlet at once.
• When the AC power adapter is plugged in, the apparatus is not completely disconnected from the main
power source, even when the unit is turned off.
6
DVD Player B
2
To AC
wall outlet
AC
adapter
1
To DC IN
9V-12V jack

Connections

Playing one DVD on both DVD Player A and B
You can watch the same DVD simultaneously on player A and B.
Watching same DVD on both Players
1. Connect the DVD Player A and B using the included Audio/
Video cable.
2. Turn on both units. Slide the DVD/AV IN switch on unit A to
"AV IN" and place a disc on it.
3. Play the DVD - unit B will display the DVD at the same time.

Connecting to a TV

If your TV has Audio/Video inputs, you can connect the DVD
Players to your TV using the included Audio/Video cable.
Watching a DVD on your TV
1. Connect your TV to the DVD players using the included
Audio/Video cable.
2. Turn on the DVD players. Slide the DVD/AV IN switch on
DVD Player A to "DVD".
3. Turn on the TV and follow the instructions included with the
TV for display of content from other sources.
Note:
• Make sure to use the correct Audio/Video cable. Connecting
the plugs incorrectly may cause a weak signal.
Connecting to Game Systems/Video Equipments (For DVD Player A only)
You can connect game system or other video equipments for playback.
Watching video equipment
1. Connect the video equipment with the DVD Player A using
the included Audio/Video cable.
2. Turn on the Player. Slide the DVD/AV IN switch to "AV IN".
3. Turn on the video equipment and follow the instructions
provided with it to playback.
Note:
• Make sure to use the correct Audio/Video cable. Connecting
the plugs incorrectly may cause a weak signal.
• If you have a mono VCR, the volume level from the speakers
will be low.
DVD Player A DVD Player B
DVD Player A
DVD Player B
DVD Player A
Game System/
Video
Equipment
7