Maintenance - Power Craft PBS-950 User Manual & Warranty

Machine specifications
1. Rear handle
2. Front handle
3. Front belt roller
4. Tensioning lever
5. Direction indicator
6. Carbon brush cover
7. Operating switch
8. Locking button
9. Adapter for dust bag
10. Dust bag
11. Driving belt cover
12. Adjusting knob for belt travel
13. Sanding belt
14. Speed controller
Package contents
1 belt sander
5 sanding belts
2 x G60
2 x G80
1 x G120
1 dust bag
1 instructions for use
Check the machine, the component parts and accessories for damage in
transport.
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.heltec.eu
Model Number: PBS-950
bSM6019 Ma-Gb # 0806-24.indd 11-12

Maintenance

Disconnect the machine from the mains before carrying out cleaning
and maintenance work.
This machine has been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation depends upon
proper machine care and regular cleaning.
Cleaning
Regularly clean the machine housing with a soft cloth, preferably after each
use. Keep the ventilation slots free from dust and dirt. If the dirt does not
come off use a soft cloth moistened with soapy water. Never use solvents
such as petrol, alcohol, ammonia water, etc. These solvents may damage the
plastic parts.
Lubrication
The machine requires no additional lubrication.
Faults
Should a fault occur, please contact the address on the warranty card. On the
back page of this manual you find an exploded view showing the parts that
can be ordered.
Environment
In order to prevent the machine from damage during transport, it is delivered
in a sturdy packaging. Most of the packaging materials can be recycled. Take
these materials to the appropriate recycling locations.
Faulty and/or discarded electrical or electronic machines have to be
collected at the appropriate recycling locations.
UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.heltec.eu
6 Model Number: PBS-950
15
6/25/08 9:18:57 AM