Front Of The Decoder; Back Of The Decoder - RCA IP900 User Manual

Front of the Decoder

Power indicator – Indicates whether the unit is on or in standby mode. Flashes when there is a broken
connection to the service provider or service is momentarily unavailable.
ETHERNET
1

Back of the Decoder

When connecting, make sure you connect Output jacks to Input jacks, Video to Video, Right Audio to
Right Audio, etc. A description of each jack follows.
Description of Jacks (from left to right)
1. ETHERNET – Connects to your Ethernet cable from your home network or modem.
2. AUDIO OUT (R and L) – Connects your decoder to a TV or A/V receiver for improved sound.
3. RF MOD – Connects to the RF modulator (not included) to power the modulator. This connection is
only necessary if your TV or VCR doesn't have audio / video input jacks.
4. VIDEO OUT – Connects to the Video Input jack on your TV.
5. S-VIDEO OUT – If your TV has an S-VIDEO jack, connects your TV for better picture quality than
using the VIDEO jack.
6. DIGITAL AUDIO OUT OPTICAL – Connects your decoder to a Dolby Digital receiver or decoder using
a digital optical connection.
7. POWER – Connects to the power supply.
Chapter 4
Chapter 4: Additional Information
RF
MOD
R L
AUDIO
VIDEO
2 3 4 5
Illustrations contained in this document are for representation only.
DIGITAL
S-VIDEO
AUDIO
6
POWER
7
25