Table of Contents
Advertisement
AUX
ON • OFF
VIDEO
WEB
MUTE
CH +
CH -
GUIDE
KEYBD
TOOLS
Indicator
OK
SELECT
BACK
1
2
4
5
7
8
AUDIO•INPUT
0
REV•REPLAY
PLAY
RECORD
STOP
Note: The TV and AUX buttons also turn
on most RCA, GE, and Proscan, products.
Tip
To turn off most RCA, GE, and Proscan
components that are connected to the
decoder, press ON•OFF twice within two
seconds.
This feature only works with some RCA, GE,
and Proscan products.
Chapter 2
TV
EMAIL
VOD
HOME
MENU
INFO
EXIT•CLEAR
3
6
9
ANTENNA
FWD•SKIP
PAUSE
Illustrations contained in this document are for representation only.
Chapter 2: The Remote Control
The Buttons on the Remote Control
(0-9) Number buttons Select channels by pressing the
number buttons.
Red, green, yellow, and blue buttons (at the bottom of the
remote) Specific functions defined by your service provider.
ANTENNA In decoder mode, turns off the decoder signal to
allow other signals to pass through. In VCR mode, functions
as the TV/VCR button.
Arrows Move the on-screen highlight, and enter data such
as letters or numbers in certain menus.
AUDIO•INPUT In decoder mode, changes the program's
audio language, if available. In VCR or TV mode, selects
between the Video Input Channel and the tuner for
compatible components. Video Input Channel refers to the
signal coming from the component connected to the audio/
video input jacks on the VCR or TV.
AUX Puts the remote in AUX mode. Can also be programmed
to operate some compatible products (A/V receiver, DVD, VCR,
etc).
BACK In Web mode, goes to the previous web page. In
menus, goes back to the previous screen or menu. In TV mode,
may return to the previously viewed channel.
CH + and CH – Selects next higher or lower channel in the
channel list.
EMAIL Turns on the decoder and goes to your email
account, if your service provider offers one.
EXIT•CLEAR Exits or clears menus.
FWD•SKIP Fast forwards video in stop mode. This button
also searches forward if pressed during playback.
GUIDE Displays the decoder program guide, if your service
provider offers one.
HOME In Web mode, takes you to your home page.
Indicator Indicates the programming mode when
programming the remote to control components.
INFO Shows on-screen information of the decoder, VCR, TV,
DVD player, etc. (whichever component is set as the remote
control's active device).
KEYBD Brings up the on-screen keyboard or removes it. Also
acts as an enter button when using the on-screen keyboard.
MENU Displays the on-screen menu system.
MUTE Reduces the TV's volume to a minimum level on
compatible TVs or A/V receivers.
11
Advertisement
Table of Contents
