Pride C1 Owner's Manual page 20

LIFT CHAIR SERIES
Standard Hand Control Operation
Follow these steps to sit in your lift chair (Fig. 5.1):
1. Engage and hold the up/down switch in the UP position to raise your lift chair to the standing position.
2. Back into the lift chair and sit in the center of the seat, using the armrests for support if needed.
3. Engage and hold the up/down switch in the DOWN position to lower the lift chair to a comfortable seated
position.
Follow these steps to recline your lift chair from the seated position (Fig. 5.1):
1. Engage and hold the up/down switch in the DOWN position until comfortably reclined.
2. Engage and hold the up/down switch in the UP position to return to an upright, seated position. Release
the switch when the lift chair reaches a comfortable seated position.
Follow these steps to stand up from your lift chair (Fig. 5.1):
1. Engage and hold the up/down switch in the UP position to raise your lift chair.
2. Release the switch when the lift chair reaches a height where you can stand up comfortably.
NOTE: The hand control on your lift chair may be equipped with an LED that indicates power to the
hand control. If this LED is present and not lit when the hand control is in use, contact your autho-
rized Pride Provider.
Heat and Massage Hand Control Operation
Follow these steps to sit in your lift chair (Fig. 5.2):
1. Press and hold the UP button to raise your lift chair to the
standing position.
2. Back into the lift chair and sit in the center of the seat,
using the armrests for support if needed.
3. Press and hold the DOWN button to lower the lift chair
to a comfortable seated position.
Follow these steps to recline your lift chair from the
seated position (Fig. 5.2):
1. Press and hold the DOWN button until comfortably
reclined.
2. Press and hold the UP button to return to an upright,
seated position. Release the button when the lift chair
reaches a comfortable seated position.
Follow these steps to stand up from your lift chair (Fig. 5.2):
1. Press and hold the UP button to raise your lift chair.
2. Release the button when the lift chair reaches a height
where you can stand up comfortably.
Follow these steps to activate/deactivate the lock feature (Fig. 5.2):
1. Press and hold the LOCK button for approximately 3 seconds to lock the hand control. The red LED to
the right of the button will light up to indicate the hand control has been locked.
2. Press and hold the LOCK button for approximately 6 seconds to unlock the hand control. The green LED
to the left of the button will light up to indicate the hand control has been unlocked.
Follow these steps to operate the heat function (Fig. 5.2):
1. Press the HEAT button once to activate the heat function. The heat function will shut off automatically
after 20 minutes of continuous use.
2. Press the HEAT button again to turn off the heat function.
20
HEAT BUTTON
UP BUTTON
UNLOCK LED
MASSAGE
SETTING
LEDS
MASSAGE
BUTTON
Figure 5.2 Heat and Massage Hand Control
www.pridemobility.com
V. OPERATION
LOCK/UNLOCK
BUTTON
LOCK LED
DOWN BUTTON
INTENSITY
SETTING LEDS
INTENSITY
BUTTON
Lift Chair Series