Lift Chair Disassembly - Pride C1 Owner's Manual

IV. ASSEMBLY/DISASSEMBLY

LIFT CHAIR DISASSEMBLY

The back portion of KD Lift Chairs can be removed to make service and transport of the chair more convenient.
Follow these steps to disassemble the lift chair:
4.3.1 Remove the bottom of the back fabric from
the hook and loop flaps on the chair base.
NOTE: If equipped with a heat and massage
option, be sure to disconnect the heat and/or
massage harnesses from the junction box.
4.3.3 Using a large flathead screwdriver, lift the left
and right locking clips on the chair-back one
side at a time to raise the back from the con-
nections on the chair base. As you lift each
locking clip, pull up on the chair-back to lift
that side over the lock.
Lift Chair Series
4.3.2 For C6 Lift Chairs, unzip the chair-back from
the chair base, then disengage the reusable
fastener securing the chair-back fabric to the
frame.
4.3.4 Lift the chair-back up and away from the
chair base.
www.pridemobility.com
LIFT CHAIR SERIES
15